Split System Installation Dandenong

Split System Installation in Dandenong

There’s nothing better than arriving to your home on a hot 40-degree day, activating your split system air conditioning and in a matter of minutes your house and your family are cool.

Split system air conditioning offers this versatility, making them hard to beat. Like all heaters and coolers that are required to run at their peak it is essential to have them checked and maintained to the highest standard by experienced professionals. Melbourne Gas Heating offers experienced technicians who know your split system air-conditioners from top to bottom. They specialize in all brands and models offering you confidence that we will complete the task at a professional level.

We provide a range of services, which include the following:

• Split System Installation Dandenong
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and certified to handle all kinds of work. If you’re looking for [keywords lower] Dandenong services then contact Local Heating and Cooling Professionals Dandenong today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Split air conditioning systems have their name because half of the system (condenser) located outside the house , while the other portion (fan coil) is inside. In cooling, warm air inside the room is absorbed through the fan coil and is then removed, which results in cooling air returning to the home. While reverse cycle allows for the heat pump to run in reverse in order to provide warmth during colder days.

Systems for split air conditioners can be installed to specific rooms, zones or rooms that are connected via copper pipes to an outdoor unit (condenser). Multiple-headed split-air conditioning units can be installed in up to nine rooms, with only one outdoor unit as well as allowing separate temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the brands we recommend that we recommend for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular heating & cooling during the summer and winter time, the annual running cost would be $272.34.

Reducing the Split System Operating Costs

It’s not difficult to cut down on your operating costs with a Split System. Depending on the model that you purchase, and the star rating, you will be able to determine how much you can save annually. Beyond the initial cost to how you make use of your Split System can help as well.

Guide to Operating A Split System

• Set the thermostat between 24C and 26C to allow for cooling. Any degree lower than that increases the running cost by approximately 10%..
• Choose the economy option If your split system comes with one. You should also regularly maintain your air conditioner.
• Keep the sun’s heat away by closing curtains and external blinds during the day. Close doors and windows to areas that are cooling when the split system is running.
• When the split system is switched off and its cooler outside, you can open doors along with windows, allowing cool air flow in.
• Insulate your property to help keep cool summer air out and keep the heat in during winter.
• Dress according to the weather conditions.

Why Choose A Split System?

Split air conditioners mounted on walls are the most widely used residential air conditioning system, as they are affordable and simple to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year since it keeps the temperature constant, cuts costs (less energy use) and creates a lot less noise when it is used. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted wall mounted split AC systems are the best cost-effective option for a single room apartment or small house as they are relatively cheap to buy (depending on how many indoor units you’ll need) and don’t need necessary duct work.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is situated in, which means that each room may have different temperatures.

Air Quality

A lot of HVAC systems that are split feature air filtering and humidity control functions that regulate the amount of dust and humidity inside a room. This provides those with sensitive skin (children older, asthmatic, or allergic people) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to one outdoor condenser, which in turn gives you the peace of mind that you have the ideal air conditioner (in terms of output and physical limitations) for a specific room.

Split System FAQ

Are split systems the same as one would expect from an air conditioner?

It is true that Split System has an air-conditioning system. However, there are many kinds of air conditioning systems. It include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principal but very different in terms of installation.

How long will it take to install a split-system air conditioner?

In general, a single AC split installation should take 3-6 hours. But, the exact amount of time may vary based on many factors such as below:

• Location and size of both the outdoor and indoor unit
• The copper pipes are routed between indoor and outdoor unit
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In the majority of cases the A/C is more than 10 years of age and you have evident issues with the A/C there’s a good possibility that it will be more affordable to replace than repair.

To assist you in making the right choice It is recommended to speak with the team at ComfyHome for an honest opinion on the state of your air conditioner.

What size of split system air conditioning will I require?

A typical measurements ratio is multiply the size of the room by a ratio of 0.15 to obtain the required power of the unit in kilowatt.

For a space that is 40 sqm, you’ll require a split system air conditioning unit that is 6 kW. An air conditioning unit of 2.5kW is the ideal size for rooms with 10-20 square meters. areas.

The size of the Split system air conditioning required can be affected by other variables like the insulation in the room, the amount of people residing there and’ location.

To make an accurate determination of the required Split Unit size we recommend you call us for a more detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general the air conditioner is built to last from 10-20 years, on average. But it depends on heaps of elements, such as the manufacturer of the air conditioner and the quality of the installation, regular service history, and more…

It is vital to check the maintenance of Your Split System AC often to prolong lifetime and enhance effectiveness.

When should I clean my air conditioner’s air filter?

As per Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy consumption by 5 to 15%.

Dandenong Gas Heating Services

• Carbon Monoxide Testing Dandenong
• Gas Heating Installation Dandenong
• Gas Space Heater Repair Dandenong
• Vulcan Ducted Gas Heating Servicing & Repair Dandenong
• Gas Hot Water System Installation & Repairs Dandenong
• Ducted Gas Heating Servicing & Repair Dandenong
• Braemar Ducted Gas Heating Servicing & Repair Dandenong
• Gas Heating Repairs Dandenong
• Evaporative Cooling Repair Dandenong
• Gas Heating Dandenong
• Gas Heating Service Dandenong
• Gas Appliance Servicing & Repair Dandenong
• Gas Log Fire Service & Repairs Dandenong
• Brivis Ducted Gas Heating Servicing & Repair Dandenong
• Dandenong

What Types of Systems We Service & Repair

Every brand and type of heating system has its own maintenance and operation Our skilled technicians have the insight and know how to provide top-quality services across all kinds of heaters, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in heating repairs and maintenance, specialising in all styles and brands of heating equipment. We are proud of our fast response time and dedication to excellence, efficiency and reliability.

We service and maintain the important brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re friendly, personable and polite.
• A Team of Experienced and Licenced Professionals
• Get a Quote With No obligation

Our Promise To You

At Melbourne Gas Heating we understand the discomfort of not having hot water and it’s something we do not believe anyone should have to experience. This is the reason we place an emphasis on emergencies with hot water. All of our plumbers are courteous and reliable and without doubt, we can assist with any emergency.

We take pride in our service to customers and it is our conviction that the tiny things are the most important.

We pride ourselves on our outstanding customer service. this is why our customers appreciate us:

• We always show up when say we will.
• Our technicians will give you an appointment when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we begin the work.
• Always making sure we clean up after us.

Our company Melbourne Gas Heating offer emergency and maintenance services in plumbing, electrical and heating. If you have any questions regarding our services and what we offer.