Split System Installation St Kilda

Split System Install in St Kilda

There’s nothing more satisfying than coming home from a scorching day of 40 degrees and activating your split system air conditioning and in just a couple of minutes the house and your family are cool.

Split system air conditioning provides such flexibility, which makes them difficult to beat. But like all heaters and coolers to make sure they’re running to their maximum it is essential to have them maintained and serviced at a high level by qualified professionals. Melbourne Gas Heating offers experienced technicians that know your split system air conditioners in and out. They specialize in all models and models providing you with assurance that we will finish the job to professional standards.

We provide a range of services, which include the following:

• Split System Installation St Kilda
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling is licensed and qualified for all sorts of work. If you are looking for Split System Installation St Kilda services then contact Local Heating and Cooling Professionals St Kilda today and talk with one of our friendly team members.

How Do Split Systems Work?

The split systems of air conditioning have their name because half of that system (condenser) being located outside the house , while the other portion (fan coil) is inside. While cooling, warm air in the room is drawn in via the fan coil, and then is then removed, which results in cool air flowing back into the house. The reverse cycle permits that the heating system to run in reverse to provide heat on cold winter days.

Split air conditioning systems can be installed to specific rooms, zones or rooms connected by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads can be used for at least nine rooms using only one outdoor unit and allow for separate temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the top brands for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular heating & cooling during the summer and winter months The annual running expense would be $272.34.

The reduction of the Split System Running Costs

It’s not hard to cut down on your operating costs by using the Split System. The model you buy, as well as its star rating will determine how much you will save each year. However looking beyond the initial price to how you use the Split System can help as well.

Guide to Using Split Systems

• Set the thermostat between 24C and 26C to allow for cooling. Every degree lower during summer will increase your running costs by about 10%..
• Make use of the economy setting when your split has one. You should also regularly maintain your air conditioning.
• Keep the sun’s heat out by closing curtains and external blinds during the day. Close all doors and windows in areas that are cooling when your split systems are running.
• If the split system is turned off and the cooler is outside, you can open doors as well as windows in order to let the cool air inside.
• Insulate your house to block the cool summer air out and keep the heat in the winter months.
• Dress to suit the weather.

Why Choose Split Systems?

Split air conditioners mounted on walls are the most frequently used air conditioning systems for homes because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year because it maintains an even temperature, helps save costs (less energy consumption) and generates less noise when used. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted Split AC units are your most economical option for a single room apartment, small home or even a studio as they are relatively cheap to purchase (depending on the amount of indoor units you require) and do not require installation of ducts.

Independent Temperature Control

Each indoor unit is able to regulate the space it is installed within, and each space may have various temperature.

Air Quality

A lot of Split air conditioners come with air filtering and humidity control functions which control the amount dust and humidity within a room. This allows for sensitive customers (children older, asthmatic, or allergic people) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to be connected to one outdoor condenser which gives you satisfaction of having the best air conditioner (in terms of output and physical limitations) for a particular room.

Split System FAQ

Is a split system the same thing as an air conditioner?

Sure, Split System includes an air-conditioning unit. However, there are different kinds of air conditioning systems. It that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All these systems operate using refrigerant and electricity, based on the same principal but very different in term of installation.

What is the time frame to install a split-system air conditioner?

Generally speaking for a single split-system air conditioner installation can be completed in 3-6 hours. However, the exact amount of time could vary based on various factors like the following:

• Dimensions and position of both the outdoor and indoor unit
• The route of copper pipes between the outdoor unit and indoor unit
• Electrical connections from the main switchboard up to the AC unit

More Split System FAQ's

Do I need to replace or fix my air conditioner?

In most situation the air conditioner is over > 10 years and has obvious issues with your AC there’s a good chance that it’s less expensive to replace it than to repair it.

To help you make the best decision To make the right choice, contact the experts at ComfyHome to provide you with an honest evaluation of the condition of your air conditioner.

What size split system air conditioning will I require?

A standard measurement ratio is to multiply the room area by a ratio of 0.15 to get the needed power of the measurement unit in kilowatts.

For a space of 40 square metres, you’ll need a Split system air conditioning unit of 6 kW. A cooling unit of 2.5kW is the ideal size for 10 -20 sqm room areas.

The size of the Split system air conditioning required will also be affected by other factors like how well the insulation is in place, the number of occupants and residents’ location.

To get an accurate estimate of the required Split dimension, we recommend you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long will a split system air conditioner last?

In general, an air conditioner is designed to last between 10 and 20 years on an average. However, it is contingent on a variety of variables, including the model of the AC it is installed on, the quality of its installation, routine maintenance history and more…

It is crucial to maintain your Split System Air Conditioner often for a longer life span and to increase effectiveness.

When should I clean my air conditioner’s air filter?

According to Daikin Australia, it is highly recommended that you take care to clean your air conditioning filter every two weeks in order to boost the efficiency of the system and reduce your energy consumption by 5%-15 percent.

St Kilda Gas Heating Services

• Gas Space Heater Repair St Kilda
• Vulcan Ducted Gas Heating Servicing & Repair St Kilda
• Gas Heating Service St Kilda
• Gas Heating Repairs St Kilda
• Brivis Ducted Gas Heating Servicing & Repair St Kilda
• Carbon Monoxide Testing St Kilda
• Gas Heating St Kilda
• Evaporative Cooling Repair St Kilda
• Gas Heating Installation St Kilda
• Ducted Gas Heating Servicing & Repair St Kilda
• St Kilda
• Gas Log Fire Service & Repairs St Kilda
• Gas Hot Water System Installation & Repairs St Kilda
• Braemar Ducted Gas Heating Servicing & Repair St Kilda
• Gas Appliance Servicing & Repair St Kilda

What Types of Systems We Service & Repair

Each model and brand of heating system has its own operation and maintenance Our experienced technicians have the knowledge and experience to offer top-quality services for all heating systems, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance with a focus on all models and types of heating systems. We take pride in a rapid response time as well as a commitment to excellence, efficiency and reliability.

We are able to service and maintain the major brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Get a Free Quote and No Costs

Our Promise To You

At Melbourne Gas Heating we understand the discomfort of not having hot water and it’s something we don’t think anyone should suffer through. This is why we place such a high priority for hot water emergencies. All of our plumbers are trustworthy and friendly We are able to assist you in any situation.

We are proud of our service to customers and it is our belief that the tiny things are the most important.

We are proud of our outstanding customer service. here’s why our customers love us:

• We always show up when say we will.
• Our experts will give you their number when they’re 30 minutes away.
• Price upfront, competitive and professional advice before we start the job.
• Always cleaning up after us.

The staff at Melbourne Gas Heating offer emergency and maintenance services for plumbing, heating, and electrical. If you have any questions regarding our services and what we can provide.