Split System Installation Edithvale

Split System Installation in Edithvale

There’s nothing more satisfying than coming to your home on a hot 40-degree day, turning on your split system air conditioning and in a matter of minutes your house and your family is cool.

Split system air-conditioning offers such flexibility, which makes them difficult to beat. Like all heaters and coolers that are required to run to their maximum they should be maintained and serviced in a professional manner by qualified experts. Melbourne Gas Heating offers experienced technicians who are familiar with split system air conditioners both inside and outside. They are experts in all makes and models of these units providing you with assurance that they will finish the job to a professional standard.

We offer a variety of different Split System Installation services which include the following:

• Split System Installation Edithvale
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and fully trained to perform all kinds of work. If you are looking for split system installation in Edithvale services then contact Local Heating and Cooling Professionals Edithvale today and talk with one of our friendly team members.

How Do Split Systems Operate?

Split air conditioning systems earn their name due to half it (condenser) located outside the house , while the second portion (fan coil) is inside. When cooling, the warm air inside the room is absorbed from the fan coil before being taken out, resulting into cool air flowing back into the house. The reverse cycle permits that the heating system to operate in reverse to provide heating in cold weather.

Systems for split air conditioners are placed in rooms, areas or multiple rooms linked by copper pipe to an outdoor unit (condenser). Systems with multi-head splits can be used for more than nine rooms using only one outdoor unit, permitting individual temperature control of each room.

What Are The Running Costs With Split Systems?

One of the top brands for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the summer and winter seasons, the annual running cost is $272.34.

Reduced the Split System Running Costs

It’s easy to reduce your running costs by using the Split System. Based on the model you purchaseand its star rating will determine how much you can save annually. But looking beyond the initial cost and how you use your Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat between 24C and 26C for cooling. Each degree less in summer will increase your running costs by 10%..
• Utilize the economy setting if your split system has one. Ensure that you regularly service your air cooling system.
• Keep the sun’s heat away by closing curtains and external blinds during the day. Close windows and doors to areas that are cooling when it is split operating.
• When the split system has been shut off and the cooler outside, open doors and windows to let the cool air flow in.
• Insulate your house to block the cool summer air out and keep the heat in during winter.
• Dress to suit the weather.

Why Select Split Systems?

Air conditioning units mounted in wall are the most commonly used residential air conditioning system because they’re affordable and easily to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year as it maintains an even temperature, helps save costs (less energy use) and generates less sound when it is utilized. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted divided AC system are most affordable option for a one room, apartment or small house since they are inexpensive to purchase (depending on how many indoor units you need) and they don’t require necessary duct work.

Independent Temperature Control

Each indoor unit is able to regulate the space it is situated in, thus each room can have a different temperature.

Air Quality

Many split air conditioning systems include air filtering and humidity control features that control the amount of dust and humidity inside the room. This allows for sensitive customers (children, elderly, asthmatic or allergic consumers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to a single outdoor condenser which gives you the peace of mind that you have the ideal Air conditioner (in terms of physical and output constraints) for a specific room.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Absolutely, Split System has an air-conditioning system. There are various kinds of air conditioning systems. These include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principal but very different in terms of installation.

How long will it take to install a split-system air conditioner?

In general, a single AC split installation should last between 3 and 6 hours. But, the exact amount of time may vary based on many factors such as below;

• Size and location of both the outdoor and indoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from the main switchboard up to the AC unit

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In the majority cases in the event that your air conditioner is at least 10 years of age and you notice obvious issues with your AC, there is a good likelihood that it is less expensive to replace it than to repair it.

To help you make the right choice It is recommended to contact the experts at ComfyHome to get an honest and accurate assessment of the condition of your AC.

What size split system air conditioning do I need?

A typical measure ratio would be to multiply the space by a factor of 0.15 to obtain the required power of the device in kilowatts.

For a room area of 40 square meters, you will require a split system air conditioning unit that is 6 kW. An air conditioning unit of 2.5kW is ideal for 10-20 sqm rooms spaces.

However, the size of the Split system’s required air conditioning is also dependent on other factors such as how well the insulation is in place, the number of occupants and residents’ position.

For a precise assessment of the required Split dimension, please contact us for a detailed analysis.

More Split System FAQ's

What is the longest a split system air conditioner last?

In general the air conditioner is built to last from 10-20 years, on an average. However, it is contingent on a variety of factors such as the model of the AC as well as the quality of the installation, routine service history and so on…

It is vital to check the maintenance of the Split System air conditioner regularly to extend its lifespan and improve effectiveness.

What is the best frequency to wash my air conditioner’s air filter?

As per Daikin Australia, it is strongly suggested that you should clean your air conditioning filters every two weeks to improve the efficiency of the system, and ultimately reduce your energy usage by 5%-15 percentage.

Edithvale Gas Heating Services

• Carbon Monoxide Testing Edithvale
• Gas Heating Repairs Edithvale
• Braemar Ducted Gas Heating Servicing & Repair Edithvale
• Brivis Ducted Gas Heating Servicing & Repair Edithvale
• Edithvale
• Gas Space Heater Repair Edithvale
• Gas Appliance Servicing & Repair Edithvale
• Gas Hot Water System Installation & Repairs Edithvale
• Gas Heating Installation Edithvale
• Gas Heating Edithvale
• Ducted Gas Heating Servicing & Repair Edithvale
• Evaporative Cooling Repair Edithvale
• Gas Heating Service Edithvale
• Gas Log Fire Service & Repairs Edithvale

What Types of Systems We Service & Repair

Each type and brand of heating system has its own operation and maintenance; our experienced technicians have the knowledge and expertise to provide excellent services on all types of heating equipment which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance with a focus on all models and models of heating systems. We pride ourselves on having a quick response time and commitment to excellence, efficiency and reliability.

We are able to maintain and service the majority of important brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re friendly and personable.
• Professionally trained and licensed team
• Request a Quote with No Obligation

Our Promise To You

We at Melbourne Gas Heating we understand the difficulty of not having hot water. This is something we do not believe anyone should be forced to endure. This is why we place the highest priority on emergencies with hot water. All of our experienced plumbers are friendly and trustworthy We are able to assist you in any circumstance.

We take pride in our customer service , and it is our firm belief that the small things count the most.

We are proud of our excellent customer service. this is why our customers are so happy with us:

• We always show up when tell you we will.
• Our techs will give you a the number to call them when they are thirty minutes away.
• Pricing upfront competitive and guidance before we begin the work.
• Always cleaning up after ourselves.

At Melbourne Gas Heating offer emergency and maintenance services in plumbing, heating, and electrical. If at any time you have some questions about our services or what we provide, we are here to help.