Split System Installation Glen Iris

Split System Install in Glen Iris

There’s nothing more satisfying than coming home from a scorching 40 degree day turning on your split system air conditioning and in just a couple of seconds, the house and your family are cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers, to ensure they are operating at their best, they need to be maintained and maintained to the highest standard by qualified professionals. Melbourne Gas Heating offers experienced technicians that know your split system air-conditioners both inside and outside. They specialize in all models and models of these units providing you with peace of mind that we are able to complete the task to a professional standard.

We provide a variety of services that comprise the following:

• Split System Installation Glen Iris
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and certified for all sorts of tasks. If you’re looking for split system installation Glen Iris services then contact Local Heating and Cooling Professionals Glen Iris today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Systems for split air conditioners get their name because half of this system (condenser) being located outside the home, while the other part (fan coil) is located inside. When it cools, warm air inside the room is drawn in from the fan coil before being eliminated, resulting in cooling air returning to the house. The reverse cycle permits the heat pump to operate in reverse to provide heat during cold days.

Split air conditioning systems are installed in individual rooms, zones or rooms connected by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads can be set up for up to nine rooms using only one outdoor unit, and allowing for the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of our recommended brands that we recommend for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular heating & cooling during the summer and winter months The annual operating cost would be measured at $272.34.

Reducing split system Running Costs

It’s easy to save on running expenses by using a Split System. The model you buy, as well as its star rating will determine just how much you can save annually. However looking beyond the initial cost and how you will use it Split System can help as well.

Tips For Operating A Split System

• Set the thermostat to 24C and 26C to cool. Any degree lower than that will increase your running costs by approximately 10%..
• Choose the economy option if your split system has one. You should also regularly maintain your air conditioner.
• Keep the sun’s heat out by closing curtains and blinds during the day. Close all doors and windows in areas that are cooling when your split systems are in operation.
• When the split system has been switched off , and the cooler outside, open the doors and windows to let cool air flow in.
• Insulate your property to help keep the warm summer days out and cool in during winter.
• Wear clothes that are appropriate for the weather conditions.

Why Select Split Systems?

Wall mounted split air conditioning systems are among the most commonly used residential air conditioning system because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year since it keeps the temperature constant, cuts costs (less consumption of energy) and produces a lesser amount of sound when it is it is used. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted split AC units are your most cost-effective option for a single room or apartment since they are inexpensive to purchase (depending on how many indoor units you’ll need) and there is no requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is situated in, so each room is able to have various temperature.

Air Quality

A lot of AC splits feature air filtering and humidity control functions which regulate the amount of dust and humidity inside the room. This provides those with sensitive skin (children and elderly, asthmatic or allergic people) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser which in turn gives you the peace of mind that you have the most suitable air conditioner (in terms of physical and output constraints) for a specific room.

Split System FAQ

Is a split system the same thing as an air conditioner?

Yes, Split System can be described as an air conditioner system. However, there are many kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate using refrigerant and electricity, based on the same principle, but are different in terms of how they are installed.

What is the time frame to set up a split system air conditioner?

Generally speaking for a single split air conditioning system installation can take between 3-6 hours. However, the exact amount of time may vary based on various factors like below:

• The size and location of both indoor and outdoor unit
• The route of copper pipes between the outdoor unit and indoor unit
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In most situation when your air conditioner is more than 10-years-old and you notice noticeable issues with your A/C there’s a good possibility that it will be more affordable to replace than repair.

To help you make the right decision for your needs, talk to the experts at ComfyHome to give you an honest evaluation of the state of your air conditioner.

What size split system air conditioning do I need?

A standard measurements ratio is multiply the room area by a factor of 0.15 to obtain the required power of the unit in kilowatt.

For a room area of 40sqm, you should have a Split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is the ideal size for rooms with 10-20 square meters. spaces.

However, the size of the Split system’s air conditioning requirements can also be affected by other variables like the insulation of the room, the amount of people residing there and’ location.

For a precise assessment of the needed Split units size we suggest that you contact us for a detailed analysis.

More Split System FAQ's

How long will a split system air conditioner last?

In general air conditioners are built to last 10-20 years, on average. However, this is contingent upon a myriad of variables, including the manufacturer of the air conditioner and the quality of the installation, the routine maintenance history and more…

It is crucial to maintain the Split System air conditioner regularly to prolong lifetime and enhance effectiveness.

Do I need to wash my air conditioner’s air filter?

According to Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every two weeks in order to boost the efficiency of the system, and ultimately reduce energy consumption by 5 to 15 15%.

Glen Iris Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Glen Iris
• Evaporative Cooling Repair Glen Iris
• Carbon Monoxide Testing Glen Iris
• Glen Iris
• Gas Log Fire Service & Repairs Glen Iris
• Gas Space Heater Repair Glen Iris
• Gas Appliance Servicing & Repair Glen Iris
• Vulcan Ducted Gas Heating Servicing & Repair Glen Iris
• Gas Hot Water System Installation & Repairs Glen Iris
• Brivis Ducted Gas Heating Servicing & Repair Glen Iris
• Ducted Gas Heating Servicing & Repair Glen Iris
• Gas Heating Service Glen Iris
• Gas Heating Glen Iris
• Gas Heating Repairs Glen Iris
• Gas Heating Installation Glen Iris

What Types of Systems We Service & Repair

Every brand and type of heating system has its own maintenance and operation; our experienced technicians are knowledgeable and know how to provide excellent services on all types of heating equipment including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance with a focus on all models and brands of heating equipment. We take pride in a quick response time and commitment to efficiency, excellence and reliability.

We are able to maintain and service all major brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re Personable & Friendly
• Highly Experienced and Licenced Team
• Get a Free Quote and No obligation

Our Promise To You

We at Melbourne Gas Heating we understand the frustration of not having hot water and it’s something we don’t think anyone should have to experience. This is the reason we place an emphasis on hot water emergencies. Our experienced plumbers are reliable and friendly Without a doubt, we can assist you in any circumstance.

We are proud of the quality of our customer service. It is our firm belief that the minor things matter most.

We take pride in our outstanding customer service. this is why our customers appreciate us:

• We always show up when say we will.
• Our experts will give you a call when they are 30 minutes away.
• Pricing upfront competitive and guidance before we even begin the job.
• Always taking care to clean up after us.

Our company Melbourne Gas Heating offer emergency and maintenance services for plumbing, heating, and electrical. If at any time you are unsure about our services, and the services we offer.