Split System Installation Kew East

Split System Install in Kew East

There’s nothing better than arriving to your home on a hot 40 degree day switching on your split system air conditioning and in just a couple of minutes , your home and family members are cool.

Split system air conditioning provides such versatility, which makes them tough to beat. However, like all heaters and coolers, to ensure they are operating at their peak they should be checked and maintained in a professional manner by skilled professionals. Melbourne Gas Heating offers experienced technicians who know your split system air-conditioners in and out. They specialise in all makes and models of these units and give you assurance that they will finish the job at a professional level.

We offer a wide range of different Split System Installation services which include the following:

• Split System Installation Kew East
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals is licensed and qualified to perform all kinds of jobs. If you’re searching for Split System Installation Kew East services then contact Local Heating and Cooling Professionals Kew East today and talk with one of our friendly team members.

How Do Split Systems Function?

Air conditioning splits get their name because half of the system (condenser) being located outside the home, while the other part (fan coil) is inside. While cooling, warm air in the room is absorbed from the fan coil and taken out, resulting into cool air being recirculated back into the house. While reverse cycle allows for that the heating system to run in reverse to provide heat during cold days.

Split air conditioning systems are installed to specific rooms, zones or rooms connected by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads can be installed in at least nine rooms, with just one outdoor unit and allow for individual temperature control of each room.

What Are The Running Costs With Split Systems?

One of the brands we recommend to use for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the summer and winter time and the annual running costs would be measured at $272.34.

Reduced split system Running Costs

It’s not difficult to save on running expenses with the Split System. The model you purchaseand its star rating will determine just how much you’ll save per year. However looking beyond the initial cost and how you will use Your Split System can help as well.

Tips For Using A Split System

• Set the thermostat to 24C and 26C to allow for cooling. Each degree less in summer will increase the running costs by around 10%.
• Choose the economy option in the event that your split system is equipped with one. Ensure that you regularly service your air conditioning.
• Keep the sun’s heat away by closing curtains and blinds during the daytime. Close doors and windows to areas that are cooling when the split system is running.
• When the split system is turned off and the cooler is outside, it is recommended to open the doors or windows and let cool air flow in.
• Insulate your home to keep the warm summer days out and cool inside in winter.
• Dress to suit the weather.

Why Select Split Systems?

The wall mounted air conditioning system is the most frequently used air conditioning systems for homes because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is the most effective way to enjoy more comfort throughout all seasons since it ensures an even temperature, helps save costs (less energy use) and generates less sound when it is utilized. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall-mounted wall mounted split AC systems are the most cost-effective option for a single room apartment or small house as they are relatively cheap to purchase (depending on how many indoor units you require) and do not require duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is placed in, so each room can have a various temperature.

Air Quality

Many Split air conditioners include air filtering and humidity control features which control the amount dust and humidity that can be found in the space. This gives sensitive customers (children or elderly, asthmatic or allergic users) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser, which in turn gives you the comfort of having the perfect Air conditioner (in terms of physical and output constraints) for the room you are in.

Split System FAQ

Are split systems the same as an air conditioner?

It is true that Split System includes an air-conditioning unit. However, there are many types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate on electricity & refrigerant under the same principal but very different in terms of how they are installed.

How long will it take to install a split-system air conditioner?

In general for a single split system air conditioning installation should last between 3 and 6 hours. But, the exact amount of time could vary based on various factors like below:

• Size and location of both indoor and outdoor unit
• The copper pipes are routed between indoor and outdoor unit
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In the majority of cases in the event that your air conditioner is at least 10 years old and you have obvious issues with your AC, there is a good chance that it’s cheaper to replace rather than fix.

To help you make the right decision It is recommended to speak with the team at ComfyHome to get an honest evaluation of the condition of your air conditioner.

What size split system air conditioning will I require?

A standard measurements ratio is multiply the room area by a ratio of 0.15 to get the needed power of the device in kilowatts.

If you have a room size of 40sqm, you should need a Split system air conditioning unit with 6 kW. A unit that can cool the air at 2.5kW is perfect for rooms with 10-20 square meters. areas.

The size of the Split system air conditioning required is also affected by other variables such as the room insulation, number of occupants and residents’ location.

For an accurate assessment of the Split Unit size we recommend you call us for a more detailed analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is designed to last between 10 and 20 years on average. But it depends on heaps of things like the brand of the A/C as well as the quality of the installation, routine service history and more…

It is important to service your Split System Air Conditioner regularly to extend its life and increase effectiveness.

Do I need to clean the air conditioner’s air filter?

According to Daikin Australia, it is strongly recommended that you clean your air conditioning filters every two weeks in order to boost the efficiency of the system, and ultimately reduce your energy usage by 5%-15 15%.

Kew East Gas Heating Services

• Gas Hot Water System Installation & Repairs Kew East
• Gas Appliance Servicing & Repair Kew East
• Evaporative Cooling Repair Kew East
• Gas Log Fire Service & Repairs Kew East
• Kew East
• Gas Heating Service Kew East
• Gas Heating Installation Kew East
• Vulcan Ducted Gas Heating Servicing & Repair Kew East
• Gas Heating Kew East
• Ducted Gas Heating Servicing & Repair Kew East
• Gas Space Heater Repair Kew East
• Carbon Monoxide Testing Kew East
• Braemar Ducted Gas Heating Servicing & Repair Kew East
• Gas Heating Repairs Kew East
• Brivis Ducted Gas Heating Servicing & Repair Kew East

What Types of Systems We Service & Repair

Each model and brand of heating comes with its own operation and maintenance Our experienced technicians have the knowledge and know how to provide excellent services across all kinds of heaters which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience with heating repair and maintenance that specialize in all kinds and brands of heating systems. We are proud of our rapid response time and dedication to excellence, efficiency , and reliability.

We are able to maintain and service the top brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Get a Free Quote and No Obligation

Our Promise To You

We at Melbourne Gas Heating we understand the inconvenience of not having any hot water. It’s a situation we believe no one should need to go through. This is why we place such a high priority for hot water emergencies. All of our plumbers are trustworthy and friendly We will be able to help with any emergency.

We pride ourselves on the quality of our customer service. It is our belief that even the small things count the most.

We are proud of our great customer service, Here’s why our clients appreciate us:

• We always show up when we declare that we will.
• Our experts will give you their number when they’re thirty minutes away.
• Competitive pricing upfront and expert advice before we begin the work.
• Always making sure we clean up after our own mess.

At Melbourne Gas Heating offer emergency and maintenance services in plumbing, electrical and heating. If you are unsure about our services and the products we offer.