Split System Installation Mornington

Split System Install in Mornington

There’s nothing more satisfying than coming home to a day and activating your split system air conditioning, and in a matter of minutes , your home and your family are cool.

Split system air-conditioning provides this versatility, making them hard to beat. But , just like all heaters or coolers to make sure they’re running at their peak they should be maintained and maintained in a professional manner by skilled professionals. Melbourne Gas Heating offers experienced technicians that know your split system air conditioners inside and out. They specialize in all brands and models of these units offering you assurance that they can get the job done to a professional standard.

We offer a variety of services, which include the following:

• Split System Installation Mornington
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and fully trained for all sorts of work. If you’re looking for split system installation Mornington services then contact Local Heating and Cooling Professionals Mornington today and talk to one of our knowledgeable team members.

How Do Split Systems Function?

The split systems of air conditioning get their name because of half this system (condenser) is located outside of the house , while the second part (fan coil) is located inside. When cooling, the warm air inside the room is taken in from the fan coil and is then removed, which results in cool air flowing back into the house. The reverse cycle permits your heat pump run in reverse in order to provide warmth during cold days.

Systems for split air conditioners are installed in individual rooms, zones or rooms that are connected via copper pipes connecting to the outdoor unit (condenser). Multiple-headed split-air conditioning units can be set up in as many as nine rooms with just one outdoor unit and allow for an individual temperature control for each room.

What Are The Running Costs With Split Systems?

One of the most recommended brands for Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the summer and winter seasons and the annual running costs is $272.34.

Lowering the Split System Operating Costs

It’s easy to lower your running expenses with the Split System. Based on the model you purchase, and it’s respective star rating will determine how much you will save each year. But looking beyond the initial price to how you will use it Split System can help as well.

Tips For Operating A Split System

• Set the thermostat between 24C and 26C to cool. Every degree lower during summer will increase your running costs by about 10%..
• Use the economy setting when your split has one. Also, you should regularly check the condition of your air conditioner.
• Keep the sun’s heat away by closing curtains and blinds during the day. Close all doors and windows in areas that are cooling when your split systems are on.
• If the split system is switched off , and the cooler outside, you can open doors and windows to let the cool air inside.
• Insulate your house to block the summer heat out and the cold in the winter months.
• Dress to suit the weather.

Why Choose Split Systems?

The wall mounted air conditioning system is the most frequently owned residential air conditioning system, as they are affordable and easily to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through all seasons since it ensures an even temperature, helps save costs (less consumption of energy) and generates less sound when it is utilized. This is accomplished by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted divided AC models are best affordable option for a one room apartment, small home or even a studio as they are comparatively inexpensive to buy (depending on the number of indoor units you’ll need) and there is no duct work required.

Independent Temperature Control

Each indoor unit is able to regulate the space it is placed in, so each room is able to have various temperature.

Air Quality

Many split air conditioning systems have air filters and humidity control mechanisms which regulate the amount of dust and humidity within the space. This provides those with sensitive skin (children or elderly, asthmatic or allergic users) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to a single outdoor condenser which in turn gives you the comfort of having the perfect air conditioner (in terms of physical and output constraints) to a specific space.

Split System FAQ

Are split systems the same as an air conditioner?

Absolutely, Split System is an air conditioning system. There are various kinds of air conditioning systems. These includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each of these systems operates using refrigerant and electricity, based on the same principle but they are different in terms.

How long will it take to install a split-system air conditioner?

In general, a single split air conditioning system installation will take between 3-6 hours. The exact length of time may vary based upon a number of variables, including below:

• Size and location of both indoor and outdoor unit
• Copper pipes that are routed between indoor and outdoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In most situation, if your air conditioner is over > 10 years and you notice apparent issues with your air conditioner there’s a good chance that it’s less expensive to replace it than to repair it.

To assist you in making the best decision for your needs, consult with the staff at ComfyHome for an honest opinion on the condition of your AC.

What size of split system air conditioning do I need?

A typical measure ratio would be to multiple the space by a factor of 0.15 in order to determine the power of the device in kilowatts.

For a room area of 40sqm, you should have a Split system air conditioning unit that is 6 kW. A cooling unit of 2.5kW is perfect for 10 -20 sqm room areas.

However, the amount of the Split system’s air conditioning requirements will also be affected by other variables such as the insulation of the room, the number of occupants and residents’ place of residence.

For an accurate assessment of the necessary Split units size please call us for a more detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general air conditioners are constructed to last for 10-20 years in the average. But it depends on heaps of factors such as the model of the AC, quality of the installation, the routine maintenance history etc…

It is essential to service the Split System air conditioner on a regular basis to prolong lifetime and enhance efficiency.

What is the best frequency to wash my air conditioner’s filter?

As per Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every two weeks to improve the efficiency of your system and possibly reduce your energy consumption by 5%-15 percentage.

Mornington Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Mornington
• Carbon Monoxide Testing Mornington
• Mornington
• Gas Log Fire Service & Repairs Mornington
• Brivis Ducted Gas Heating Servicing & Repair Mornington
• Gas Space Heater Repair Mornington
• Gas Heating Mornington
• Ducted Gas Heating Servicing & Repair Mornington
• Evaporative Cooling Repair Mornington
• Vulcan Ducted Gas Heating Servicing & Repair Mornington
• Gas Heating Service Mornington
• Gas Appliance Servicing & Repair Mornington
• Gas Heating Installation Mornington
• Gas Hot Water System Installation & Repairs Mornington
• Gas Heating Repairs Mornington

What Types of Systems We Service & Repair

Each model and brand of heating system has its own operation and maintenance Our skilled technicians have the knowledge and experience to offer first rate services to all systems of heating, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience with heating repair and maintenance with a focus on all models and brands of heating systems. We are proud of our quick response time and commitment to quality, efficiency and reliability.

We are able to service and maintain the top brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re personable and friendly
• Highly Experienced and Licenced Team
• Get a Quote With No Costs

Our Promise To You

We at Melbourne Gas Heating we understand the inconvenience of not having any hot water, and it’s something that we would never want anyone to have to experience. This is the reason we place such a high priority for hot water emergencies. Our plumbers are courteous and reliable We will be able to help with any emergency.

We take pride in our customer service and it is our conviction that the little things matter the most.

We pride ourselves on our exceptional customer service. here’s why our customers are so happy with us:

• We will always be there when we declare that we will.
• Our staff will give you an appointment when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we start the job.
• Always taking care to clean up after us.

At Melbourne Gas Heating offer emergency and maintenance services for plumbing, electrical and heating. If you have questions about our services, and the services we can offer, please contact us.