Split System Installation Oakleigh

Split System Installation in Oakleigh

There’s nothing better than arriving home from a scorching 40 degree day activating your split system air conditioning and in just a couple of minutes your house and your family will be cool.

Split system air conditioning provides such versatility, making them hard to beat. But , just like all heaters or coolers, to ensure they are operating at their best they must be maintained and serviced at a high level by experienced professionals. Melbourne Gas Heating offers experienced technicians that know your split system air conditioners in and out. They specialize in all brands and models of these units providing you with assurance that we can get the job done to a professional standard.

We provide a variety of services that comprise the following:

• Split System Installation Oakleigh
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed to perform all kinds of work. If you’re in search of [keywords lower] Oakleigh services then contact Local Heating and Cooling Professionals Oakleigh today and talk with one of our friendly team members.

How Do Split Systems Work?

Split air conditioning systems get their name because of half the system (condenser) is located outside of the house while the other portion (fan coil) is inside. When it cools, hot air that is inside the room is brought in via the fan coil and removed, resulting in cool air flowing back into the home. In reverse mode, it allows your heat pump operate in reverse, providing heating during colder days.

Split air conditioning systems are installed to specific rooms, zones or rooms connected by copper piping with an outside unit (condenser). Split air conditioners with multiple heads can be set up for more than nine rooms with just one outdoor unit permitting the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of our recommended brands of Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating during the winter and summer periods and the annual running costs would be $272.34.

Reduced Split System Running Costs

It’s not hard to lower your running expenses with a Split System. The model you purchaseand its star rating will determine just how much you will save each year. But looking beyond the initial cost and how you make use of the Split System can help as well.

Guide to Using A Split System

• Set the thermostat between 24C and 26C to allow for cooling. Every degree lower in summer increases the running cost by about 10%..
• Choose the economy option in the event that your split system is equipped with one. Also, you should regularly check the condition of your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains and blinds in the morning. Close windows and doors to areas that are cooling when the split system is running.
• When the split system is switched off , and the cooler outside, open the doors as well as windows in order to let cool air flow in.
• Insulate your home to keep the summer heat out and the cold in the winter months.
• Dress appropriately for the weather conditions.

Why Select Split Systems?

Wall mounted split air conditioning systems are the most frequently used residential air conditioning system because they are cost-effective and easily to maintain.

Inverter Technology

Inverter technology is the most effective way to enjoy more comfort throughout the year since it keeps a constant temperature, saves costs (less energy consumption) and creates a lot less sound when it is employed. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall mounted split AC systems are the most economical option for a single room apartment or small house because they are relatively inexpensive to purchase (depending on the amount of indoor units you need) and there is no requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the area it is installed within, and each space may have different temperatures.

Air Quality

Many split air conditioning systems come with air filters and humidity control mechanisms that control the amount of dust and humidity within the space. This gives sensitive customers (children older, asthmatic, or allergic people) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to one outdoor condenser which gives you the convenience of having the ideal AC (in terms of physical and output constraints) to a specific space.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Yes, Split System has an air-conditioning system. However, there are many types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All these systems operate on electricity & refrigerant under the same principles, however they are different in terms of installation.

How long does it take to set up a split system air conditioner?

In general an individual AC split installation will last between 3 and 6 hours. However, the exact amount of time will depend on various factors like below;

• Location and size of both indoor and outdoor unit
• The routing of copper pipes between indoor and outdoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In most situation, if your air conditioner is over > 10-years-old and there are evident issues with the A/C There is a high chance that it could be cheaper to replace rather than fix.

In order to help you make the right decision for your needs, consult with the staff at ComfyHome for an honest assessment on the state of your air conditioner.

What size split system air conditioning will I require?

A typical measurement ratio is to multiply the area of the room by a factor of 0.15 in order to determine the power of the measurement unit in kilowatts.

If you have a room size of 40 square meters, you will require a split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is perfect for 10-20 sqm rooms spaces.

However, the size of the Split system’s air conditioning requirements is also affected by other factors like the room insulation, quantity of residents and’ location.

To get an accurate estimate of the needed Split dimension, please contact us for a comprehensive analysis.

More Split System FAQ's

How long will a split system air conditioner last?

In general air conditioners are designed to last between 10 and 20 years in the average. But it depends on heaps of factors such as the brand of the A/C it is installed on, the quality of its installation, the routine maintenance history and so on…

It is crucial to maintain your Split System Air Conditioner often to prolong lifetime and enhance efficiency.

What is the best frequency to wash my air conditioner’s filter?

In accordance with Daikin Australia, it is highly recommended that you take care to clean your air conditioning filter every 2 weeks to increase the efficiency of the system and decrease your energy use by 5 to 15 percent.

Oakleigh Gas Heating Services

• Gas Log Fire Service & Repairs Oakleigh
• Brivis Ducted Gas Heating Servicing & Repair Oakleigh
• Braemar Ducted Gas Heating Servicing & Repair Oakleigh
• Gas Heating Repairs Oakleigh
• Vulcan Ducted Gas Heating Servicing & Repair Oakleigh
• Gas Appliance Servicing & Repair Oakleigh
• Oakleigh
• Gas Space Heater Repair Oakleigh
• Gas Heating Oakleigh
• Ducted Gas Heating Servicing & Repair Oakleigh
• Evaporative Cooling Repair Oakleigh
• Gas Heating Service Oakleigh
• Carbon Monoxide Testing Oakleigh
• Gas Heating Installation Oakleigh
• Gas Hot Water System Installation & Repairs Oakleigh

What Types of Systems We Service & Repair

Each type and brand of heating system has its individual operation and maintenance requirements Our experienced technicians are knowledgeable and experience to offer first rate services across all kinds of heaters for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance, specialising in all styles and brands of heating systems. We pride ourselves on having a fast response time and dedication to efficiency, excellence and reliability.

We are able to service and maintain the leading brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re personable and friendly
• Professionally trained and licensed team
• Get a Free Quote and No Obligation

Our Promise To You

At Melbourne Gas Heating we understand the inconvenience of not having any hot water and it’s something we believe no one should have to experience. This is the reason we place top priority on hot water emergencies. All of our experienced plumbers are courteous and reliable Without a doubt, we can assist you in all situations.

We are proud of our service to customers and it is our conviction that the tiny things are the most important.

We pride ourselves on our excellent customer service. this is why our customers love us:

• We will always be there when we say we will.
• Our techs will give you a an appointment when they are thirty minutes away.
• Pricing upfront competitive and guidance before we begin the work.
• Always getting our hands clean after ourselves.

We at Melbourne Gas Heating offer emergency and maintenance services for electrical, plumbing and heating. If at any time you have some questions about our services or what we offer.