Split System Installation Sherbrooke

Split System Install in Sherbrooke

There’s nothing better than coming home on a hot 40 degree day activating your split system air conditioning, and in a matter of minutes your house and your family is cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers to make sure they’re running optimally it is essential to have them serviced and maintained to a high standard by qualified professionals. Melbourne Gas Heating offers experienced technicians who are familiar with split system air-conditioners from top to bottom. They specialise in all makes and models of these units offering you assurance that they will complete the task to professional standards.

We provide a range of services that comprise the following:

• Split System Installation Sherbrooke
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed for all sorts of tasks. If you’re looking for split system installation Sherbrooke services then contact Local Heating and Cooling Professionals Sherbrooke today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

The split systems of air conditioning get the name because of one half of that system (condenser) being located outside the house , while the other part (fan coil) is located inside. While cooling, warm air from inside the room is taken in by the fan coil and eliminated, resulting in cooling air returning to the house. In reverse mode, it allows the heat pump to run in reverse to provide heating during colder days.

Split air conditioning systems can be installed to specific rooms, areas or even multiple rooms linked by copper pipe connecting to the outdoor unit (condenser). Systems with multi-head splits can be installed for as many as nine rooms and only one outdoor unit, and allow for separate temperature control for each room.

What Are The Ongoing Costs For Split Systems?

One of the brands we recommend of Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating throughout the summer and winter time and the annual running costs would be $272.34.

Reduced Costs of Split Systems Operating Costs

It’s easy to reduce your running costs with the Split System. Based on the model you purchase, and the star rating will determine how much you can save annually. But looking beyond the initial cost to the way you use your Split System can help as well.

Tips For Operating A Split System

• Set the thermostat between 24C and 26C for cooling. Each degree less in summer will increase your running costs by 10%..
• Use the economy setting when your split has one. Ensure that you regularly service your air conditioner.
• Keep the sun’s heat away by closing curtains and blinds during the daytime. Close all doors and windows in areas that are cooled when the split system is on.
• When the split system has been switched off and its cooler outside, open the doors and windows to let cool air in.
• Insulate your house to block warm summer days out and cool in during winter.
• Dress to suit the weather.

Why Select A Split System?

Air conditioning units mounted in wall are the most widely owned residential air conditioning system because they’re affordable and easily to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through all seasons since it ensures a constant temperature, saves costs (less energy use) and generates less sound when it is utilized. This is accomplished by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted divided AC models are most budget option for a small room or apartment as they are relatively cheap to purchase (depending on the amount of indoor units you require) and they don’t require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is placed in, which means that each room can have a different temperatures.

Air Quality

Many AC splits come with air filtering and humidity control features that regulate the amount of dust and humidity inside the space. This allows for sensitive customers (children or elderly, asthmatic or allergic customers) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser which gives you the convenience of having the perfect Air conditioner (in terms of output and physical restrictions) for a specific room.

Split System FAQ

Are split systems the same thing as the air conditioning?

It is true that Split System is an air conditioning system. However, there are many kinds of air conditioning systems. These that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate with refrigerant and electricity under the same principle but they are different in terms of installation.

How long will it take to install a split system air conditioner?

In general the typical split-system air conditioner installation should last between 3 and 6 hours. The exact length of time will depend on a variety of factors, such as below:

• The size and location of both outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and the indoor unit
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of situations the A/C is more than 10 years and there are obvious issues with your AC, there is a good possibility that it will be cheaper to replace then repair.

For help in making the best decision To make the right choice, talk to the experts at ComfyHome for an honest assessment on the state of your air conditioner.

What size of split system air conditioning do I need?

The standard measure ratio would be to multiply the room area by a factor of 0.15 in order to determine the power of the measurement unit in kilowatts.

For a space of 40 square metres, you’ll have a Split system air conditioning unit that is 6 kW. A cooling unit of 2.5kW is ideal for 10-20 square meter room areas.

However, the amount of the Split system’s air conditioning can be affected by other factors like the insulation of the room, the number of occupants and residents’ position.

For a precise assessment of the necessary Split Unit size we suggest you call us for a more detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general an air conditioner is constructed to last for 10-20 years in the average. But this depends on a lot of factors such as the brand of the A/C, quality of the installation, routine service history etc…

It is essential to service your split system air conditioner regularly to extend its life and increase effectiveness.

When should I clean the air conditioner’s air filter?

According to Daikin Australia, it is strongly suggested that you should wash your air conditioner’s filters every two weeks to improve the system’s efficiency and potentially reduce your energy usage by 5 to 15 15%.

Sherbrooke Gas Heating Services

• Sherbrooke
• Evaporative Cooling Repair Sherbrooke
• Gas Space Heater Repair Sherbrooke
• Gas Appliance Servicing & Repair Sherbrooke
• Gas Heating Sherbrooke
• Ducted Gas Heating Servicing & Repair Sherbrooke
• Gas Heating Service Sherbrooke
• Braemar Ducted Gas Heating Servicing & Repair Sherbrooke
• Gas Heating Installation Sherbrooke
• Carbon Monoxide Testing Sherbrooke
• Vulcan Ducted Gas Heating Servicing & Repair Sherbrooke
• Gas Hot Water System Installation & Repairs Sherbrooke
• Brivis Ducted Gas Heating Servicing & Repair Sherbrooke
• Gas Log Fire Service & Repairs Sherbrooke
• Gas Heating Repairs Sherbrooke

What Types of Systems We Service & Repair

Each model and brand of heating has it’s individual operation and maintenance requirements; our experienced technicians have the insight and experience to offer excellent services across all kinds of heaters, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in the field of heating repairs and maintenance and specialize in all types and models of heating systems. We take pride in a fast response time and dedication to excellence, efficiency and reliability.

We are able to service and maintain all leading brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re personable and friendly
• Highly Experienced and Licenced Team
• Get a Quote With No Obligation

Our Promise To You

At Melbourne Gas Heating we understand the frustration of not having hot water and it’s something that we would never want anyone to need to go through. This is why we place an emphasis on emergencies involving hot water. Our plumbers are reliable and friendly We will be able to help you in any circumstance.

We pride ourselves on our customer service , and it is our firm belief that the small things count the most.

We pride ourselves on our excellent customer service. Here’s why our clients are so happy with us:

• We always arrive when we tell you we will.
• Our experts will give you a call when they are thirty minutes away.
• Pricing upfront competitive and guidance prior to the start of the project.
• Always making sure we clean up after our own mess.

We at Melbourne Gas Heating offer emergency and maintenance services for plumbing, electrical, and heating. If at any time you have some questions about our services or what we provide, we are here to help.