Split System Installation Toorak

Split System Install in Toorak

There’s nothing more enjoyable than coming home to a day and activating your split system air conditioning and in just a couple of minutes your house and your family will be cool.

Split system air conditioning offers this versatility, making them hard to beat. But , just like all heaters or coolers that are required to run at their best they should be checked and maintained to the highest standard by qualified experts. Melbourne Gas Heating offers experienced technicians that know your split system air conditioners in and out. They specialise in all makes and models offering you peace of mind that we are able to complete the task in a professional manner.

We offer a wide range of services, which include the following:

• Split System Installation Toorak
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and certified for all sorts of jobs. If you are looking for Split System Installation Toorak services then contact Local Heating and Cooling Professionals Toorak today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Split air conditioning systems earn their name because half of the system (condenser) being outside the house while the other half (fan coil) is installed inside. While cooling, hot air that is inside the room is drawn in through the fan coil, and then taken out, resulting into cool air recirculating back into the home. In reverse mode, it allows the heat pump to operate in reverse to provide heating in cold weather.

Air conditioning split systems can be installed in individual rooms, areas or even multiple rooms connected by copper piping connecting to the outdoor unit (condenser). Split air conditioners with multiple heads can be used in at least nine rooms, with just one outdoor unit as well as allowing the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of the most recommended brands of Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating throughout the summer and winter time The annual operating cost would be $272.34.

Reduced Split System Running Costs

It’s not hard to cut down on your operating costs by using the Split System. Depending on the model you buy, as well as its star rating, you will be able to determine how much you will save each year. Beyond the initial cost to how you utilize your Split System can help as well.

Guide to Using Split Systems

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Every degree lower during summer will increase your running costs by about 10%..
• Utilize the economy setting if your split system has one. Also, you should regularly check the condition of your air conditioner.
• Keep the sun’s heat out by closing curtains and external blinds in the morning. Close all doors and windows in areas that are cooling when it is split in operation.
• If the split system is switched off , and the cooler outside, open the doors as well as windows in order to let the cool air circulate.
• Insulate your residence to prevent heat out in summer and inside during winter.
• Dress appropriately for the weather.

Why Select A Split System?

Wall mounted split air conditioning systems are among the most commonly owned residential air conditioning system, as they are affordable and simple to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year since it keeps the temperature at a constant level, reduces costs (less energy use) and produces relatively less sound when it is used. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted split AC models are best economical option for a single room apartment or small house as they are comparatively inexpensive to purchase (depending on the number of indoor units you’ll need) and don’t need duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is located in, so each room is able to have distinct temperature.

Air Quality

Many AC splits include air filtering and humidity control functions that regulate the amount of dust and humidity inside a room. This allows for sensitive customers (children and elderly, asthmatic or allergic consumers) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to a single outdoor condenser which provides the peace of mind that you have the perfect Air conditioner (in terms of output and physical constraints) for a specific room.

Split System FAQ

Are split systems similar to an air conditioner?

Sure, Split System has an air-conditioning system. However, there are many kinds of air conditioning systems. These that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates using refrigerant and electricity, based on the same principal but very different in terms.

How long does it take to install a split system air conditioner?

In general for a single AC split installation will take 3-6 hours. The exact length of time could vary based upon a number of variables, including below;

• Location and size of both outdoor and indoor unit
• The route of copper pipes between outdoor and indoor units
• Electrical connections from main switchboards to A/C unit

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of cases the A/C is more than 10 years of age and there are obvious issues with your AC there’s a good likelihood that it is less expensive to replace it than to repair it.

To help you make the best decision, it is best to contact the experts at ComfyHome to give you an honest evaluation of the condition of your air conditioner.

What size of split system air conditioner do I need?

The standard measure ratio would be to multiple the area of the room by a ratio of 0.15 to get the needed power of the measurement unit in kilowatts.

If you have a room size of 40 square metres, you’ll need a Split system air conditioning unit of 6 kW. A unit that can cool the air at 2.5kW is suitable for 10 -20 sqm room areas.

However, the amount of the Split system air conditioning required can be dependent on other factors such as how well the insulation is in place, the size of the room, and’ locations.

For an accurate assessment of the Split Unit size please call us for a more detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general air conditioners are built to last from 10-20 years, on an average. But it depends on heaps of variables, including the model of the AC as well as the quality of the installation, regular service history, and more…

It is crucial to maintain the Split System air conditioner frequently to prolong lifetime and enhance effectiveness.

When should I clean my air conditioner’s air filter?

As per Daikin Australia, it is highly recommended that you cleanse your air conditioning filters every two weeks to improve the efficiency of your system and possibly decrease your energy use by 5 to 15 15%.

Toorak Gas Heating Services

• Evaporative Cooling Repair Toorak
• Gas Heating Repairs Toorak
• Ducted Gas Heating Servicing & Repair Toorak
• Vulcan Ducted Gas Heating Servicing & Repair Toorak
• Gas Space Heater Repair Toorak
• Gas Heating Service Toorak
• Toorak
• Gas Appliance Servicing & Repair Toorak
• Gas Heating Toorak
• Gas Log Fire Service & Repairs Toorak
• Gas Heating Installation Toorak
• Gas Hot Water System Installation & Repairs Toorak
• Brivis Ducted Gas Heating Servicing & Repair Toorak
• Braemar Ducted Gas Heating Servicing & Repair Toorak

What Types of Systems We Service & Repair

Each type and brand of heating system has its own maintenance and operation; our experienced technicians have the insight and experience to offer first rate services across all kinds of heaters, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance, specialising in all styles and models of heating systems. We pride ourselves on a quick response time and commitment to excellence, efficiency and reliability.

We can service and maintain the majority of top brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reviews & Reputation
• We’re Personable & Friendly
• Highly Experienced and Licenced Team
• Request a Quote with No Obligation

Our Promise To You

At Melbourne Gas Heating we understand the frustration of not having hot water. This is something we believe no one should suffer through. This is why we put top priority on emergencies with hot water. Our plumbers are courteous and reliable Without a doubt, we will be able to help you in any situation.

We take pride in our service to customers and it is our firm belief that the small things count the most.

We take pride in our excellent customer service. and here’s the reason our customers love us:

• We always arrive when we promise to be there.
• Our staff will give you a call when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we even begin the job.
• Always getting our hands clean after our own mess.

We at Melbourne Gas Heating offer emergency and maintenance services in electrical, plumbing and heating. If you are unsure about our services, and the services we can provide.