Split System Installation Bangholme

Split System Install in Bangholme

There’s nothing more enjoyable than coming to your home on a hot 40 degree day turning on your split system air conditioning, and in a matter of minutes , your home and your family is cool.

Split system air-conditioning provides this versatility, which makes them tough to beat. Like all heaters and coolers to keep them running optimally, they need to be serviced and maintained to the highest standard by skilled professionals. Melbourne Gas Heating offers experienced technicians who know your split system air-conditioners in and out. They specialise in all makes and models of these units giving you the assurance that we can get the job done to a professional standard.

We offer a variety of services that comprise the following:

• Split System Installation Bangholme
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling is licensed and qualified for all sorts of work. If you’re searching for split system installation in Bangholme services then contact Local Heating and Cooling Professionals Bangholme today and talk with one of our friendly team members.

How Do Split Systems Work?

Systems for split air conditioners are the name because of one half of the system (condenser) being located outside the house while the other part (fan coil) is inside. When it cools, warm air in the room is absorbed through the fan coil before being removed, resulting in cool air being recirculated back into the home. The reverse cycle permits the heat pump to operate in reverse, providing heating during cold days.

The split system of air conditioning can be installed in individual rooms, areas or even multiple rooms connected by copper piping with an outside unit (condenser). Multiple-headed split-air conditioning units can be installed for as many as nine rooms using only one outdoor unit, and allow for the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of the most recommended brands for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating during the summer and winter seasons The annual operating cost would be measured at $272.34.

Reducing Costs of Split Systems Operating Costs

It’s easy to lower your running expenses by using a Split System. The model you purchaseand its star rating, you will be able to determine how much you’ll save per year. However looking beyond the initial cost to how you utilize your Split System can help as well.

Tips For Using Split Systems

• Set the thermostat between 24C and 26C to cool. Every degree lower during summer will increase your running costs by approximately 10%..
• Use the economy setting if your split system has one. You should also regularly maintain your air cooling system.
• Keep the sun’s heat away by closing curtains and blinds in the morning. Close all doors and windows in areas being cooled when your split systems are operating.
• If the split system is switched off and its cooler outside, open doors and windows to let the cool air inside.
• Insulate your residence to prevent the cool summer air out and keep the heat inside during winter.
• Dress appropriately for the weather.

Why Choose Split Systems?

Split air conditioners mounted on walls are among the most commonly owned residential air conditioning system, as they are affordable and easy to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year since it keeps a constant temperature, saves costs (less consumption of energy) and produces a lesser amount of noise when used. This is accomplished by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted Split AC models are most affordable option for a one room, apartment or small house because they are relatively inexpensive to purchase (depending on the amount of indoor units you need) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the temperature of the room it is located in, so each room can have a various temperature.

Air Quality

Many HVAC systems that are split feature air filtering and humidity control features which regulate the amount of dust and humidity in the space. This can provide those with sensitive conditions (children and elderly, asthmatic or allergic customers) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to a single outdoor condenser that in turn provides you with the peace of mind that you have the ideal Air conditioner (in terms of output and physical restrictions) for a particular room.

Split System FAQ

Are split systems the same as one would expect from an air conditioner?

Absolutely, Split System is an air conditioning system. But, the different kinds of air conditioning systems. It includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All these systems operate using refrigerant and electricity, based on the same principle but they are different in terms of installation.

How long does it take to install a split-system air conditioner?

Generally speaking for a single AC split installation is expected to last between 3 and 6 hours. However, the exact amount of time could vary based upon a number of variables, including below;

• The size and location of both the outdoor and indoor unit
• The route of copper pipes between the outdoor unit and indoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In the majority of situations in the event that your air conditioner is more than 10 years and you notice evident issues with the A/C there’s a good chance that it’s cheaper to replace then repair.

To assist you in making the right decision, it is best to speak with the team at ComfyHome to provide you with an honest assessment on the condition of your AC.

What size split system air conditioning will I require?

A standard measurements ratio is multiple the room area by a ratio of 0.15 to calculate the necessary power of the unit in kilowatt.

For a room with a size of 40sqm, you should need a Split system air conditioning unit of 6 kW. A cooling unit of 2.5kW is perfect for 10-20 sqm rooms areas.

However, the amount of the Split system’s required air conditioning will also be affected by other variables such as how well the insulation is in place, the size of the room, and’ place of residence.

To make an accurate determination of the needed Split units size we recommend you contact us for a comprehensive analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general air conditioners are designed to last between 10 and 20 years on an average. But it depends on heaps of factors such as the manufacturer of the air conditioner, quality of the installation, regular service history, and so on…

It is important to service Your Split System AC frequently to extend its life and increase efficiency.

When should I clean my air conditioner’s air filter?

According to Daikin Australia, it is strongly recommended that you take care to clean your air conditioning filter every 2 weeks to increase the efficiency of your system and possibly reduce your energy consumption by 5 to 15 15%.

Bangholme Gas Heating Services

• Ducted Gas Heating Servicing & Repair Bangholme
• Gas Hot Water System Installation & Repairs Bangholme
• Evaporative Cooling Repair Bangholme
• Gas Log Fire Service & Repairs Bangholme
• Gas Heating Service Bangholme
• Braemar Ducted Gas Heating Servicing & Repair Bangholme
• Bangholme
• Gas Heating Repairs Bangholme
• Gas Heating Bangholme
• Gas Appliance Servicing & Repair Bangholme
• Brivis Ducted Gas Heating Servicing & Repair Bangholme
• Vulcan Ducted Gas Heating Servicing & Repair Bangholme
• Gas Space Heater Repair Bangholme
• Carbon Monoxide Testing Bangholme
• Gas Heating Installation Bangholme

What Types of Systems We Service & Repair

Each model and brand of heating comes with its own maintenance and operation Our highly skilled technicians have the insight and experience to offer first rate services on all types of heating equipment including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in the field of heating repairs and maintenance, specialising in all styles and types of heating systems. We are proud of our fast response time and dedication to excellence, efficiency and reliability.

We are able to maintain and service the top brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reviews & Reputation
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Get a Quote Without Costs

Our Promise To You

We at Melbourne Gas Heating we understand the frustration of not having hot water. It’s a situation we don’t think anyone should suffer through. That’s why we give the highest priority on emergencies involving hot water. All of our plumbers are friendly and trustworthy and without doubt, we are able to assist with any emergency.

We pride ourselves on our service to customers and it is our firm belief that the tiny things are the most important.

We are proud of our great customer service, and here’s the reason our customers love us:

• We always arrive when we tell you we will.
• Our techs will give you a the number to call them when they are thirty minutes away.
• Price upfront, competitive and professional advice prior to the start of the project.
• Always taking care to clean up after us.

The staff at Melbourne Gas Heating offer emergency and maintenance services for plumbing, electrical and heating. If you have questions about our services, and the services we can provide.