Split System Installation Belgrave South

Split System Install in Belgrave South

There’s nothing better than coming to your home on a hot day of 40 degrees and switching on your split system air conditioning and in just a couple of minutes the house and your family will be cool.

Split system air-conditioning provides this versatility, which makes them tough to beat. However, like all heaters and coolers that are required to run optimally it is essential to have them checked and maintained in a professional manner by qualified professionals. Melbourne Gas Heating offers experienced technicians that know your split system air-conditioners inside and out. They specialise in all makes and models offering you assurance that they are able to complete the task to a professional standard.

We offer a wide range of different Split System Installation services which include the following:

• Split System Installation Belgrave South
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and fully trained for all sorts of work. If you’re searching for split system installation in Belgrave South services then contact Local Heating and Cooling Professionals Belgrave South today and talk with one of our friendly team members.

How Do Split Systems Operate?

The split systems of air conditioning are their name due to half this system (condenser) being outside the house , while the other portion (fan coil) is installed inside. In cooling, warm air from inside the room is drawn in by the fan coil and eliminated, resulting in cool air being recirculated back into the home. Reverse cycle allows your heat pump operate in reverse to provide heat on cold winter days.

Air conditioning split systems are installed to specific rooms, areas or even multiple rooms linked by copper pipe into an outdoor unit (condenser). Split air conditioners with multiple heads can be set up for more than nine rooms with only one outdoor unit as well as allowing individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of the brands we recommend for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating throughout the summer and winter months, the annual running cost is $272.34.

Lowering Costs of Split Systems Operating Costs

It’s not hard to cut down on your operating costs with the Split System. Depending on the model that you purchaseand its star rating will determine how much you will save each year. Beyond the initial cost and how you utilize Your Split System can help as well.

Tips For Using A Split System

• Set the thermostat to 24C and 26C for cooling. Any degree lower than that increases the running cost by around 10%.
• Utilize the economy setting if your split system has one. Also, you should regularly check the condition of your air cooling system.
• Keep the sun’s heat out by closing the curtains and exterior blinds during the day. Close all doors and windows in areas that are cooled when you have the split unit operating.
• When the split system has been shut off and the cooler outside, you can open doors or windows and let the cool air inside.
• Insulate your property to help keep summer heat out and the cold in the winter months.
• Wear clothes that are appropriate for the weather.

Why Select A Split System?

Split air conditioners mounted on walls are the most widely used residential air conditioning system because they are cost-effective and easy to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout the year as it maintains the temperature at a constant level, reduces costs (less consumption of energy) and produces relatively less noise when used. This is achieved by managing the speed of the compressor more precisely.

Affordable

Wall mounted Split AC system are best economical option for a single room, apartment or small house as they are relatively cheap to purchase (depending on how many indoor units you need) and don’t need necessary duct work.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is located within, and each space is able to have different temperatures.

Air Quality

A lot of Split air conditioners have air filters and humidity control mechanisms that control the amount of dust and humidity inside the space. This can provide those with sensitive conditions (children, elderly, asthmatic or allergic consumers) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to one outdoor condenser which gives you the comfort of having the best air conditioner (in terms of output and physical limitations) to a specific space.

Split System FAQ

Is a split system similar to an air conditioner?

Yes, Split System includes an air-conditioning unit. However, there are many kinds of air conditioning systems. These that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each of these systems operates with refrigerant and electricity under the same principle, but are different in terms.

How long does it take to set up a split system air conditioner?

Generally speaking the typical split system air conditioning installation is expected to last between 3 and 6 hours. But, the exact amount of time could vary based on a variety of factors, such as below;

• Dimensions and position of both the outdoor and indoor unit
• Copper pipes that are routed between the outdoor unit and indoor unit
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of situations when your air conditioner is over > 10 years old and there are noticeable issues with your A/C there’s a good possibility that it will be cheaper to replace rather than fix.

To help you make the right choice, it is best to contact the experts at ComfyHome for an honest assessment on the state of your air conditioner.

What size split system air conditioning do I need?

The standard measurement ratio is to multiple the area of the room by a factor of 0.15 to calculate the necessary power of the device in kilowatts.

For a room with a size that is 40 sqm, you’ll have a Split system air conditioning unit that is 6 kW. A unit that can cool the air at 2.5kW is suitable for 10 -20 sqm room spaces.

However, the amount of the Split system’s required air conditioning can also be affected by other variables such as the room insulation, amount of people residing there and’ location.

To make an accurate determination of the necessary Split units size please contact us for a detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general air conditioners are designed to last between 10 and 20 years on an average. But it depends on heaps of factors such as the brand of the A/C as well as the quality of the installation, the routine maintenance history and so on…

It is vital to check the maintenance of your Split System Air Conditioner often to prolong lifetime and enhance effectiveness.

When should I wash my air conditioner’s filter?

As per Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every two weeks in order to boost the efficiency of your system and possibly reduce your energy consumption by 5%-15 15%.

Belgrave South Gas Heating Services

• Carbon Monoxide Testing Belgrave South
• Vulcan Ducted Gas Heating Servicing & Repair Belgrave South
• Evaporative Cooling Repair Belgrave South
• Braemar Ducted Gas Heating Servicing & Repair Belgrave South
• Gas Heating Repairs Belgrave South
• Gas Space Heater Repair Belgrave South
• Ducted Gas Heating Servicing & Repair Belgrave South
• Gas Heating Installation Belgrave South
• Brivis Ducted Gas Heating Servicing & Repair Belgrave South
• Gas Hot Water System Installation & Repairs Belgrave South
• Gas Heating Belgrave South
• Belgrave South
• Gas Appliance Servicing & Repair Belgrave South
• Gas Log Fire Service & Repairs Belgrave South
• Gas Heating Service Belgrave South

What Types of Systems We Service & Repair

Each type and brand of heating system has its own maintenance and operation Our skilled technicians have the knowledge and expertise to provide the best service on all types of heating equipment for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience with heating repair and maintenance, specialising in all styles and types of heating systems. We pride ourselves on a rapid response time as well as a commitment to excellence, efficiency , and reliability.

We can service and maintain the leading brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re Personable & Friendly
• A Team of Experienced and Licenced Professionals
• Request a Quote with No obligation

Our Promise To You

We at Melbourne Gas Heating we understand the discomfort of not having hot water, and it’s something we do not believe anyone should need to go through. This is why we put an emphasis on hot water emergencies. All of our experienced plumbers are courteous and reliable Without a doubt, we will be able to assist you in all situations.

We take pride in our customer service and it is our conviction that the tiny things are the most important.

We are proud of our exceptional customer service. and here’s the reason our customers love us:

• We always arrive when we tell you we will.
• Our experts will give you a call when they are 30 minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always cleaning up after us.

At Melbourne Gas Heating offer emergency and maintenance services in plumbing, electrical and heating. If you have any questions regarding our services and the products we provide, we are here to help.