Split System Installation Blackburn

Split System Install in Blackburn

There’s nothing more satisfying than coming home on a hot 40 degree day flipping on your split-system air conditioning and in a matter of minutes the house and your family is cool.

Split system air conditioning offers this versatility, making them hard to beat. But like all heaters and coolers to keep them running optimally they must be serviced and maintained to the highest standard by qualified experts. Melbourne Gas Heating offers experienced technicians that know your split system air conditioners both inside and outside. They specialise in all makes and models of these units offering you assurance that they will finish the job in a professional manner.

We offer a wide range of services that comprise the following:

• Split System Installation Blackburn
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts is licensed and qualified to complete all types of tasks. If you are looking for split system installation in Blackburn services then contact Local Heating and Cooling Professionals Blackburn today and talk with one of our helpful team members.

How Do Split Systems Operate?

Split air conditioning systems earn their name because of half it (condenser) being outside the house , while the other part (fan coil) is installed inside. When cooling, the warm air from inside the room is taken in from the fan coil, and then eliminated, resulting in cool air flowing back into the home. The reverse cycle permits the heat pump to operate in reverse in order to provide warmth during cold days.

Split air conditioning systems can be installed in individual rooms, areas or multiple rooms linked by copper pipe to an outdoor unit (condenser). Split air conditioners with multiple heads can be set up for up to nine rooms and only one outdoor unit, and allow for individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of our recommended brands that we recommend for Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating during the summer and winter time, the annual running cost would be measured at $272.34.

Reduced Costs of Split Systems Operating Costs

It’s not difficult to reduce your running costs with a Split System. Depending on the model you buy, as well as its star rating will determine how much you can save annually. It is important to look beyond the initial cost to how you utilize your Split System can help as well.

Guide to Using A Split System

• Set the thermostat to 24C and 26C to cool. Any degree lower than that will increase your running costs by 10%..
• Choose the economy option in the event that your split system is equipped with one. You should also regularly maintain your air conditioner.
• Make sure that the sun’s heat is kept out by closing the curtains and exterior blinds during the day. Close doors and windows to areas that are cooled when you have the split unit on.
• When the split system has been shut off and the cooler outside, it is recommended to open the doors and windows to let the cool air inside.
• Insulate your property to help keep the warm summer days out and cool in the winter months.
• Wear clothes that are appropriate for the weather conditions.

Why Choose Split Systems?

Air conditioning units mounted in wall are the most widely owned residential air conditioning system because they are cost-effective and easily to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year since it keeps the temperature at a constant level, reduces costs (less consumption of energy) and produces relatively less noise when it is used. This is achieved through managing the speed of the compressor more precisely.

Affordable

Wall-mounted Split AC models are most cost-effective option for a single room apartment or small house because they are relatively inexpensive to buy (depending on how many indoor units you’ll need) and there is no installation of ducts.

Independent Temperature Control

Each indoor unit is able to control the temperature of the room it is installed within, and each space is able to have different temperature.

Air Quality

Many Split air conditioners include air filtering and humidity control features that regulate the amount of dust and humidity that can be found in the space. This provides those with sensitive skin (children and elderly, asthmatic or allergic users) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser which provides the comfort of having the ideal Air conditioner (in terms of output and physical restrictions) for a particular room.

Split System FAQ

Are split systems similar to one would expect from an air conditioner?

Yes, Split System has an air-conditioning system. However, there are different kinds of air conditioning systems. These that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates with refrigerant and electricity under the same principles, however they are different in term of installation.

How long does it take to install a split-system air conditioner?

In general an individual split system air conditioning installation will last between 3 and 6 hours. The exact length of time can vary based on a variety of factors, such as below;

• The size and location of both indoor and outdoor unit
• The copper pipes are routed between the outdoor unit and the indoor unit
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Do I need to replace or fix the air conditioning unit in my home?

In the majority cases when your air conditioner is at least 10-years-old and has noticeable issues with your A/C, there is a good possibility that it will be more affordable to replace than repair.

For help in making the right choice, it is best to speak with the team at ComfyHome for an honest assessment on the condition of your air conditioner.

What size of split system air conditioner will I require?

A typical measuring ratio will multiply the space by a factor of 0.15 to obtain the required power of the unit in Kilowatts.

For a room with a size of 40sqm, you should have a Split system air conditioning unit with 6 kW. An air conditioning unit of 2.5kW is suitable for 10-20 sqm rooms spaces.

The size of the Split system air conditioning required can also be affected by other variables such as the room insulation, size of the room, and’ place of residence.

For a precise assessment of the required Split unit size, we suggest you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general, an air conditioner is built to last 10-20 years on an average. However, it is contingent on a variety of variables, including the brand of the A/C and the quality of the installation, routine maintenance history and so on…

It is crucial to maintain your split system air conditioner on a regular basis to extend its lifespan and improve efficiency.

How often should I clean the air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly recommended that you take care to clean your air conditioning filter every two weeks in order to boost the efficiency of your system and possibly reduce energy consumption by 5 to 15 percent.

Blackburn Gas Heating Services

• Gas Heating Installation Blackburn
• Gas Heating Repairs Blackburn
• Braemar Ducted Gas Heating Servicing & Repair Blackburn
• Gas Appliance Servicing & Repair Blackburn
• Ducted Gas Heating Servicing & Repair Blackburn
• Gas Log Fire Service & Repairs Blackburn
• Gas Space Heater Repair Blackburn
• Gas Hot Water System Installation & Repairs Blackburn
• Brivis Ducted Gas Heating Servicing & Repair Blackburn
• Gas Heating Service Blackburn
• Gas Heating Blackburn
• Evaporative Cooling Repair Blackburn
• Vulcan Ducted Gas Heating Servicing & Repair Blackburn
• Carbon Monoxide Testing Blackburn
• Blackburn

What Types of Systems We Service & Repair

Each brand and style of heating comes with its specific operation and maintenance needs; our experienced technicians are knowledgeable and experience to offer excellent services to all systems of heating, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in repairs and maintenance of heating systems and specialize in all types and brands of heating systems. We take pride in a rapid response time as well as a commitment to excellence, efficiency , and reliability.

We can service and maintain the majority of top brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reviews & Reputation
• We’re Personable & Friendly
• Professionally trained and licensed team
• Get a Quote With No obligation

Our Promise To You

We at Melbourne Gas Heating we understand the discomfort of not having hot water. It’s a situation we believe no one should need to go through. That’s why we give top priority on hot water emergencies. All of our plumbers are trustworthy and friendly Without a doubt, we can assist you in any situation.

We are proud of our customer service and it is our conviction that the minor things matter most.

We pride ourselves on our great customer service, this is why our customers appreciate us:

• We will always be there when we promise to be there.
• Our staff will give you an appointment when they are thirty minutes away.
• Pricing upfront competitive and guidance before we begin the work.
• Always making sure we clean up after us.

At Melbourne Gas Heating offer emergency and maintenance services for electrical, plumbing and heating. If you have some questions about our services and what we can provide.