Split System Installation Braeside

Split System Installation in Braeside

There’s nothing better than coming home on a hot day and turning on your split system air-conditioning and within a matter of seconds, the house and family members are cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers to make sure they’re running at their best they must be checked and maintained at a high level by qualified professionals. Melbourne Gas Heating offers experienced technicians who know your split system air-conditioners from top to bottom. They specialise in all makes and models and give you assurance that they will finish the job at a professional level.

We offer a wide range of services that comprise the following:

• Split System Installation Braeside
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and certified for all sorts of work. If you are looking for split system installation in Braeside services then contact Local Heating and Cooling Professionals Braeside today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

Split air conditioning systems are their name due to half it (condenser) being outside the house , while the second part (fan coil) is inside. While cooling, warm air in the room is brought in through the fan coil and is then removed, which results in cool air flowing back into the house. In reverse mode, it allows your heat pump run in reverse, providing heating during colder days.

The split system of air conditioning are placed in rooms, zones or rooms linked by copper pipe with an outside unit (condenser). Split air conditioners with multiple heads can be used in at least nine rooms, with just one outdoor unit as well as allowing separate temperature control for each room.

What Are The Ongoing Costs For Split Systems?

One of the most recommended brands for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the summer and winter months The annual operating cost would be $272.34.

The reduction of the Split System Running Costs

It’s not hard to reduce your running costs by using a Split System. Depending on the model you buy, as well as its star rating will determine how much you will save each year. But looking beyond the initial cost to how you utilize the Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat between 24C and 26C for cooling. Each degree less in summer increases the running cost by about 10%..
• Make use of the economy setting in the event that your split system is equipped with one. Also, you should regularly check the condition of your air cooling system.
• Keep the sun’s heat out by closing curtains as well as external blinds during the day. Close doors and windows to areas that are being cooled while your split systems are on.
• When the split system has been switched off and its cooler outside, open doors as well as windows in order to let cool air in.
• Insulate your home to keep warm summer days out and cool inside during winter.
• Dress according to the weather.

Why Select A Split System?

Split air conditioners mounted on walls are the most frequently owned by homeowners who own a residential air conditioning system because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is the most effective way to enjoy more comfort throughout the year because it maintains the temperature constant, cuts costs (less energy use) and generates less noise when used. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted split AC units are your most economical option for a single room or apartment because they are relatively inexpensive to purchase (depending on the amount of indoor units you require) and don’t need installation of ducts.

Independent Temperature Control

Each indoor unit is able to control the room that it is installed in, which means that each room could have different temperature.

Air Quality

A lot of AC splits include air filtering functions and humidity control that regulate the amount of dust and humidity inside a room. This allows for sensitive customers (children and elderly, asthmatic or allergic users) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser which provides the comfort of having the perfect AC (in terms of output and physical restrictions) to a specific space.

Split System FAQ

Is a split system the same as the air conditioning?

Yes, Split System includes an air-conditioning unit. However, there are many kinds of air conditioning systems. It includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All these systems operate by using refrigerant and electricity. They all operate on the same principal but very different in terms.

What is the time frame to install a split-system air conditioner?

In general the typical split system air conditioning installation can be completed in 3-6 hours. However, the exact amount of time may vary based on various factors like below:

• The size and location of both the outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboard up to the AC unit

More Split System FAQ's

Do I need to replace or fix my air conditioner?

In most situation, if your air conditioner is over > 10 years and there are noticeable issues with your A/C there’s a good likelihood that it is cheaper to replace rather than fix.

In order to help you make the right decision for your needs, consult with the staff at ComfyHome to give you an honest and accurate assessment of the condition of your air conditioner.

What size split system air conditioning do I need?

A standard measurements ratio is multiple the size of the room by a factor of 0.15 in order to determine the power of the measurement unit in kilowatts.

For a space of 40sqm, you should require a split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is ideal for 10-20 sqm rooms areas.

However, the size of the Split system’s required air conditioning will also be affected by other variables like the insulation of the room, the number of occupants and residents’ place of residence.

To make an accurate determination of the needed Split dimension, please contact us for a detailed analysis.

More Split System FAQ's

What is the longest a split system air conditioner last?

In general, an air conditioner is designed to last between 10 and 20 years on average. However, this is contingent upon a myriad of things like the brand of the A/C as well as the quality of the installation, routine service history etc…

It is important to service your Split System Air Conditioner on a regular basis to extend its life and increase efficiency.

How often should I wash my air conditioner’s filter?

As per Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every two weeks in order to boost the efficiency of the system, and ultimately reduce your energy usage by 5 to 15 percentage.

Braeside Gas Heating Services

• Braeside
• Gas Appliance Servicing & Repair Braeside
• Gas Log Fire Service & Repairs Braeside
• Gas Hot Water System Installation & Repairs Braeside
• Braemar Ducted Gas Heating Servicing & Repair Braeside
• Gas Heating Repairs Braeside
• Carbon Monoxide Testing Braeside
• Gas Heating Installation Braeside
• Gas Heating Braeside
• Ducted Gas Heating Servicing & Repair Braeside
• Brivis Ducted Gas Heating Servicing & Repair Braeside
• Gas Heating Service Braeside
• Gas Space Heater Repair Braeside
• Evaporative Cooling Repair Braeside
• Vulcan Ducted Gas Heating Servicing & Repair Braeside

What Types of Systems We Service & Repair

Each brand and style of heating has it’s own maintenance and operation Our skilled technicians have the insight and experience to offer first rate services across all kinds of heaters, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in the field of heating repairs and maintenance and specialize in all types and types of heating systems. We take pride in a rapid response time and dedication to quality, efficiency and reliability.

We are able to service and maintain the leading brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re Personable & Friendly
• A Team of Experienced and Licenced Professionals
• Get a Quote Without obligation

Our Promise To You

At Melbourne Gas Heating we understand the discomfort of not having hot water and it’s something that we would never want anyone to have to experience. This is why we place such a high priority on hot water emergencies. Our experienced plumbers are friendly and trustworthy and without doubt, we can assist you in any circumstance.

We take pride in our service to customers and it is our belief that the small things count the most.

We take pride in our excellent customer service. and here’s the reason our customers love us:

• We always arrive when we tell you we will.
• Our techs will give you a their number when they’re thirty minutes away.
• Pricing upfront competitive and guidance before we begin the work.
• Always getting our hands clean after us.

We at Melbourne Gas Heating offer emergency and maintenance services for plumbing, heating, and electrical. If you have questions about our services and the products we provide, we are here to help.