Split System Installation Bulleen

Split System Installation in Bulleen

There’s nothing better than arriving home to a 40 degree day flipping on your split-system air conditioning and in just a couple of seconds, the house and your family will be cool.

Split system air conditioning offers this flexibility, which makes them difficult to beat. But , just like all heaters or coolers to keep them running to their maximum, they need to be serviced and maintained in a professional manner by skilled professionals. Melbourne Gas Heating offers experienced technicians that know your split system air conditioners both inside and outside. They specialize in all models and models of these units and give you assurance that they will finish the job at a professional level.

We provide a variety of services that comprise the following:

• Split System Installation Bulleen
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and certified for all sorts of work. If you’re searching for [keywords lower] Bulleen services then contact Local Heating and Cooling Professionals Bulleen today and talk with one of our friendly team members.

How Do Split Systems Work?

Systems for split air conditioners have the name because of one half of this system (condenser) being outside the home, while the other part (fan coil) is inside. When cooling, the warm air from inside the room is drawn in by the fan coil before being is then removed, which results in cool air being recirculated back into the home. Reverse cycle allows the heat pump to run in reverse, providing heating during colder days.

Systems for split air conditioners are installed in individual rooms, areas , or rooms that are connected via copper pipes connecting to the outdoor unit (condenser). Multi-head split air conditioning systems can be used in up to nine rooms with only one outdoor unit and allow for separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of our recommended brands for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating during the winter and summer periods, the annual running cost is $272.34.

The reduction of the Split System Operating Costs

It doesn’t take much to reduce your running costs by using a Split System. The model you purchaseand its star rating will determine how much you’ll save per year. However looking beyond the initial cost and how you use your Split System can help as well.

Guide to Using A Split System

• Set the thermostat to 24C and 26C for cooling. Every degree lower during summer will increase the running costs by around 10%.
• Choose the economy option in the event that your split system is equipped with one and regularly service your air conditioner.
• Keep the sun’s heat away by closing curtains and external blinds in the morning. Close the doors and windows of areas that are cooled when your split systems are operating.
• If the split system is switched off , and the cooler outside, you can open doors or windows and let cool air inside.
• Insulate your house to block the cool summer air out and keep the heat inside during winter.
• Dress according to the weather.

Why Select Split Systems?

The wall mounted air conditioning system is the most commonly owned residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year since it keeps an even temperature, helps save costs (less energy use) and produces relatively less sound when it is it is used. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted Split AC system are best affordable option for a one room apartment or small house since they are inexpensive to buy (depending on how many indoor units you need) and there is no installation of ducts.

Independent Temperature Control

Each indoor unit is able to control the area it is placed in, so each room may have various temperature.

Air Quality

Many HVAC systems that are split include air filtering and humidity control functions that control the amount of dust and humidity in the space. This allows for sensitive customers (children older, asthmatic, or allergic users) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser that in turn provides you with the comfort of having the perfect Air conditioner (in terms of output and physical limitations) for a specific room.

Split System FAQ

Are split systems the same as an air conditioner?

Absolutely, Split System is an air conditioning system. However, there are different kinds of air conditioning systems. It that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All of them operate by using refrigerant and electricity. They all operate on the same principal but very different in terms.

How long does it take to install a split system air conditioner?

In general, a single split system air conditioning installation will take between 3-6 hours. However, the exact amount of time may vary based upon a number of variables, including the following:

• Size and location of both outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and the indoor unit
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In the majority of cases the A/C is more than 10 years old and you notice apparent issues with your air conditioner there’s a good possibility that it will be cheaper to replace rather than fix.

In order to help you make the best decision To make the right choice, consult with the staff at ComfyHome to give you an honest assessment on the state of your air conditioner.

What size of split system air conditioning do I need?

A typical measure ratio would be to multiple the area of the room by a factor of 0.15 to obtain the required power of the device in kilowatts.

For a space that is 40 sqm, you’ll require a split system air conditioning unit of 6 kW. An air conditioning unit of 2.5kW is suitable for 10 -20 sqm room spaces.

However, the amount of the Split system air conditioning required can also be affected by other variables such as the room insulation, size of the room, and’ location.

To get an accurate estimate of the necessary Split unit size, we suggest that you contact us for a detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general air conditioners are built to last from 10-20 years on average. But it depends on heaps of elements, such as the brand of the A/C, quality of the installation, the routine maintenance history etc…

It is crucial to maintain your Split System Air Conditioner often for a longer life span and to increase effectiveness.

When should I clean the air conditioner’s air filter?

As per Daikin Australia, it is strongly recommended to take care to clean your air conditioning filter every two weeks in order to boost the efficiency of the system, and ultimately reduce energy consumption by 5%-15 percentage.

Bulleen Gas Heating Services

• Gas Appliance Servicing & Repair Bulleen
• Braemar Ducted Gas Heating Servicing & Repair Bulleen
• Carbon Monoxide Testing Bulleen
• Gas Heating Installation Bulleen
• Bulleen
• Gas Heating Repairs Bulleen
• Gas Log Fire Service & Repairs Bulleen
• Gas Hot Water System Installation & Repairs Bulleen
• Gas Heating Service Bulleen
• Evaporative Cooling Repair Bulleen
• Ducted Gas Heating Servicing & Repair Bulleen
• Vulcan Ducted Gas Heating Servicing & Repair Bulleen
• Brivis Ducted Gas Heating Servicing & Repair Bulleen
• Gas Heating Bulleen

What Types of Systems We Service & Repair

Each type and brand of heating requires its own operation and maintenance Our experienced technicians are knowledgeable and know how to provide excellent services on all types of heating equipment which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in repairs and maintenance of heating systems that specialize in all kinds and brands of heating equipment. We take pride in a quick response time and commitment to efficiency, excellence and reliability.

We service and maintain all major brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re Personable & Friendly
• Experienced & Licenced Team
• Get a Quote Without obligation

Our Promise To You

At Melbourne Gas Heating we understand the inconvenience of not having any hot water. This is something we do not believe anyone should suffer through. That’s why we give top priority on emergencies involving hot water. Our experienced plumbers are friendly and trustworthy and without doubt, we can assist with any emergency.

We take pride in our customer service , and it is our belief that the small things count the most.

We take pride in our great customer service, and here’s the reason our customers appreciate us:

• We will always be there when we say we will.
• Our staff will give you the number to call them when they are 30 minutes away.
• Price upfront, competitive and professional advice before we start the job.
• Always cleaning up after our own mess.

We at Melbourne Gas Heating offer emergency and maintenance services for electrical, plumbing and heating. If you have some questions about our services and the products we can offer, please contact us.