Split System Installation Eaglemont

Split System Install in Eaglemont

There’s nothing better than coming home on a hot 40-degree day, activating your split system air conditioning and in just a couple of seconds, the house and your family are cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers that are required to run optimally they must be checked and maintained to a high standard by skilled professionals. Melbourne Gas Heating offers experienced technicians that know your split system air conditioners from top to bottom. They specialise in all makes and models providing you with assurance that they can get the job done to professional standards.

We provide a range of services that include the following:

• Split System Installation Eaglemont
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling is licensed and qualified to complete all types of jobs. If you’re looking for split system installation in Eaglemont services then contact Local Heating and Cooling Professionals Eaglemont today and talk with one of our helpful team members.

How Do Split Systems Function?

Split air conditioning systems have their name because half of this system (condenser) being outside the home, while the other part (fan coil) is inside. In cooling, warm air from inside the room is absorbed through the fan coil, and then removed, resulting in cool air flowing back into the house. The reverse cycle permits that the heating system to operate in reverse to provide heat during colder days.

Split air conditioning systems are installed to specific rooms, areas or even multiple rooms linked by copper pipe into an outdoor unit (condenser). Split air conditioners with multiple heads can be installed for up to nine rooms, with only one outdoor unit as well as allowing individual temperature control of each room.

What Are The Ongoing Costs For Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the summer and winter months The annual running expense will be $272.34.

The reduction of Split System Running Costs

It’s not hard to reduce your running costs by using a Split System. Based on the model you purchase, and the star rating will determine just how much you’ll save per year. Beyond the initial cost to the way you make use of Your Split System can help as well.

Guide to Using A Split System

• Set the thermostat to 24C and 26C to cool. Every degree lower during summer will increase your running costs by 10%..
• Use the economy setting if your split system has one and regularly service your air conditioner.
• Make sure that the sun’s heat is kept out by closing curtains and blinds during the daytime. Close all doors and windows in areas that are cooling when you have the split unit in operation.
• When the split system has been switched off , and the cooler outside, open the doors and windows to let cool air in.
• Insulate your residence to prevent the warm summer days out and cool in the winter months.
• Dress according to the weather.

Why Choose A Split System?

Air conditioning units mounted in wall are among the most commonly used air conditioning systems for homes, as they are affordable and easy to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year since it keeps an even temperature, helps save costs (less energy consumption) and produces a lesser amount of sound when it is utilized. This is accomplished by managing the speed of the compressor more precisely.

Affordable

Wall mounted Split AC system are most affordable option for a one room apartment, small home or even a studio since they are inexpensive to purchase (depending on the amount of indoor units you require) and they don’t require necessary duct work.

Independent Temperature Control

Each indoor unit is able to regulate the space it is installed in, so each room is able to have different temperatures.

Air Quality

A lot of Split air conditioners have air filters and humidity control mechanisms that control the amount of dust and humidity that can be found in the room. This allows for sensitive customers (children, elderly, asthmatic or allergic consumers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to a single outdoor condenser which provides the comfort of having the best cooling system (in terms of physical and output constraints) for a particular room.

Split System FAQ

Is a split system similar to an air conditioner?

It is true that Split System is an air conditioning system. However, there are many kinds of air conditioning systems. These includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates by using refrigerant and electricity. They all operate on the same principle, but are different in terms.

How long does it take to set up a split system air conditioner?

In general, a single split air conditioning system installation is expected to take 3-6 hours. But, the exact amount of time can vary based on many factors such as below;

• Size and location of both outdoor and indoor unit
• The routing of copper pipes between the outdoor unit and indoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Do I need to replace or fix my air conditioner?

In most situation when your A/C is more than 10 years old and you notice obvious issues with your AC, there is a good chance that it’s less expensive to replace it than to repair it.

To assist you in making the right choice To make the right choice, consult with the staff at ComfyHome to give you an honest opinion on the state of your air conditioner.

What size split system air conditioning do I need?

The standard measurements ratio is multiply the room area by a ratio of 0.15 in order to determine the power of the unit in Kilowatts.

For a room area of 40sqm, you should need a Split system air conditioning unit of 6 kW. An air conditioning unit of 2.5kW is the ideal size for 10-20 sqm rooms spaces.

However, the size of the Split system’s air conditioning can also be affected by other variables such as how well the insulation is in place, the size of the room, and’ place of residence.

For a precise assessment of the necessary Split dimension, we suggest that you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is constructed to last for 10-20 years, on average. But this depends on a lot of elements, such as the manufacturer of the air conditioner, quality of the installation, routine service history and so on…

It is essential to service your Split System Air Conditioner often to prolong lifetime and enhance effectiveness.

What is the best frequency to wash my air conditioner air filter?

Based on Daikin Australia, it is highly recommended that you wash your air conditioner’s filters every two weeks to improve the system’s efficiency and potentially reduce your energy usage by 5 to 15 percentage.

Eaglemont Gas Heating Services

• Brivis Ducted Gas Heating Servicing & Repair Eaglemont
• Gas Heating Repairs Eaglemont
• Vulcan Ducted Gas Heating Servicing & Repair Eaglemont
• Gas Heating Eaglemont
• Gas Heating Installation Eaglemont
• Gas Log Fire Service & Repairs Eaglemont
• Gas Hot Water System Installation & Repairs Eaglemont
• Evaporative Cooling Repair Eaglemont
• Eaglemont
• Gas Appliance Servicing & Repair Eaglemont
• Ducted Gas Heating Servicing & Repair Eaglemont
• Carbon Monoxide Testing Eaglemont
• Braemar Ducted Gas Heating Servicing & Repair Eaglemont
• Gas Heating Service Eaglemont
• Gas Space Heater Repair Eaglemont

What Types of Systems We Service & Repair

Each brand and style of heating has it’s own maintenance and operation Our highly skilled technicians are knowledgeable and experience to offer excellent services for all heating systems, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience with heating repair and maintenance and specialize in all types and brands of heating systems. We are proud of our quick response time and commitment to excellence, efficiency , and reliability.

We are able to service and maintain the majority of top brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re friendly and personable.
• Highly Experienced and Licenced Team
• Request a Quote with No obligation

Our Promise To You

We at Melbourne Gas Heating we understand the difficulty of not having hot water. This is something we do not believe anyone should have to experience. This is the reason we place the highest priority on hot water emergencies. All of our plumbers are reliable and friendly and without doubt, we are able to assist you in all situations.

We pride ourselves on our customer service , and it is our belief that the minor things matter most.

We take pride in our outstanding customer service. this is why our customers are so happy with us:

• We always show up when we declare that we will.
• Our techs will give you a an appointment when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we begin the work.
• Always taking care to clean up after ourselves.

We at Melbourne Gas Heating offer emergency and maintenance services in electrical, plumbing and heating. If you are unsure about our services and what we can provide.