Split System Installation Frankston

Split System Install in Frankston

There’s nothing better than coming home on a hot 40-degree day, activating your split system air conditioning and in a matter of minutes the house and your family will be cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. Like all heaters and coolers to keep them running optimally it is essential to have them serviced and maintained to the highest standard by qualified experts. Melbourne Gas Heating offers experienced technicians that know your split system air conditioners from top to bottom. They specialize in all models and models of these units offering you peace of mind that we can get the job done at a professional level.

We offer a wide range of different Split System Installation services which include the following:

• Split System Installation Frankston
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts is licensed and qualified for all sorts of tasks. If you’re looking for [keywords lower] Frankston services then contact Local Heating and Cooling Professionals Frankston today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

The split systems of air conditioning get their name because of half the system (condenser) being located outside the house , while the second portion (fan coil) is inside. When cooling, the warm air in the room is brought in via the fan coil, and then is then removed, which results in cool air being recirculated back into the home. In reverse mode, it allows your heat pump operate in reverse to provide heat during cold days.

Systems for split air conditioners are installed in individual rooms, areas , or rooms linked by copper pipe into an outdoor unit (condenser). Multi-head split air conditioning systems are able to be fitted for up to nine rooms, with only one outdoor unit, and allow for the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating during the summer and winter seasons, the annual running cost would be $272.34.

Lowering Costs of Split Systems Operating Costs

It’s not hard to cut down on your operating costs with a Split System. Based on the model you buy, as well as its star rating, you will be able to determine how much you’ll save per year. But looking beyond the initial cost to the way you make use of your Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat between 24C and 26C for cooling. Each degree less in summer will increase your running costs by about 10%..
• Utilize the economy setting when your split has one. Ensure that you regularly service your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains as well as external blinds during the day. Close the doors and windows of areas that are cooling when you have the split unit on.
• When the split system has been turned off and the cooler is outside, it is recommended to open the doors along with windows, allowing the cool air inside.
• Insulate your residence to prevent summer heat out and the cold inside in winter.
• Dress appropriately for the weather.

Why Select A Split System?

Split air conditioners mounted on walls are the most frequently used air conditioning systems for homes because they’re affordable and easily to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year as it maintains a constant temperature, saves costs (less energy consumption) and creates a lot less sound when it is used. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall mounted Split AC models are best cost-effective option for a single room, apartment or small house because they are relatively inexpensive to buy (depending on the number of indoor units you require) and there is no requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the area it is located in, thus each room can have a various temperature.

Air Quality

Many Split air conditioners have air filtering functions and humidity control that control the amount of dust and humidity in the room. This provides those with sensitive skin (children and elderly, asthmatic or allergic customers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to one outdoor condenser which in turn gives you the convenience of having the best cooling system (in terms of output and physical limitations) for a particular room.

Split System FAQ

Is a split system similar to the air conditioning?

Yes, Split System has an air-conditioning system. But, the different kinds of air conditioning systems. It includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates by using refrigerant and electricity. They all operate on the same principle but they are different in terms of how they are installed.

What is the time frame to set up a split system air conditioner?

In general for a single split air conditioning system installation will take between 3-6 hours. However, the exact amount of time will depend upon a number of variables, including the following:

• Location and size of both outdoor and indoor unit
• The route of copper pipes between outdoor and indoor units
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In the majority of cases in the event that your air conditioner is over > 10 years and has obvious issues with your AC, there is a good possibility that it will be cheaper to replace rather than fix.

To help you make the right choice, it is best to speak with the team at ComfyHome to provide you with an honest assessment on the condition of your air conditioner.

What size of split system air conditioner do I need?

A standard measure ratio would be to multiple the area of the room by a ratio of 0.15 to obtain the required power of the device in kilowatts.

If you have a room size of 40 square meters, you will require a split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is perfect for 10-20 square meter room areas.

However, the size of the Split system’s air conditioning requirements can also be affected by other variables like the room insulation, size of the room, and’ place of residence.

To get an accurate estimate of the Split dimension, we suggest you call us for a more detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general the air conditioner is built to last from 10-20 years in the average. But this depends on a lot of things like the model of the AC it is installed on, the quality of its installation, routine service history and so on…

It is crucial to maintain the Split System air conditioner on a regular basis to extend its lifespan and improve efficiency.

When should I wash the air conditioner’s air filter?

In accordance with Daikin Australia, it is highly recommended that you take care to clean your air conditioning filter every two weeks in order to boost the efficiency of the system and decrease your energy use by 5 to 15%.

Frankston Gas Heating Services

• Gas Heating Service Frankston
• Gas Space Heater Repair Frankston
• Gas Log Fire Service & Repairs Frankston
• Ducted Gas Heating Servicing & Repair Frankston
• Carbon Monoxide Testing Frankston
• Gas Heating Repairs Frankston
• Gas Heating Frankston
• Brivis Ducted Gas Heating Servicing & Repair Frankston
• Braemar Ducted Gas Heating Servicing & Repair Frankston
• Evaporative Cooling Repair Frankston
• Gas Heating Installation Frankston
• Vulcan Ducted Gas Heating Servicing & Repair Frankston
• Gas Appliance Servicing & Repair Frankston
• Frankston
• Gas Hot Water System Installation & Repairs Frankston

What Types of Systems We Service & Repair

Each brand and style of heating system has its individual operation and maintenance requirements Our highly skilled technicians are equipped with the expertise and know how to provide top-quality services across all kinds of heaters, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in heating repairs and maintenance with a focus on all models and brands of heating equipment. We take pride in a fast response time and dedication to efficiency, excellence and reliability.

We service and maintain the major brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re Personable & Friendly
• A Team of Experienced and Licenced Professionals
• Request a Quote with No Obligation

Our Promise To You

At Melbourne Gas Heating we understand the discomfort of not having hot water, and it’s something we don’t think anyone should be forced to endure. This is the reason we place the highest priority on emergencies with hot water. All of our experienced plumbers are trustworthy and friendly, without a doubt we will be able to help you in any situation.

We take pride in our service to customers and it is our conviction that the minor things matter most.

We are proud of our excellent customer service. and here’s the reason our customers love us:

• We will always be there when we tell you we will.
• Our experts will give you a call when they are 30 minutes away.
• Pricing upfront competitive and guidance before we even begin the job.
• Always cleaning up after us.

At Melbourne Gas Heating offer emergency and maintenance services for plumbing, electrical, and heating. If at any time you have questions about our services and what we can offer, please contact us.