Split System Installation Greensborough

Split System Install in Greensborough

There’s nothing better than coming home from a scorching 40-degree day, flipping on your split-system air conditioning and in a matter of minutes , your home and your family will be cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers that are required to run at their peak it is essential to have them serviced and maintained at a high level by experienced professionals. Melbourne Gas Heating offers experienced technicians who are familiar with split system air conditioners in and out. They specialize in all brands and models offering you assurance that we can get the job done to a professional standard.

We offer a wide range of services that include the following:

• Split System Installation Greensborough
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are licensed and fully trained to handle all kinds of jobs. If you are looking for Split System Installation Greensborough services then contact Local Heating and Cooling Professionals Greensborough today and talk with one of our friendly team members.

How Do Split Systems Operate?

Air conditioning splits earn their name due to half the system (condenser) located outside the home, while the other part (fan coil) is inside. In cooling, hot air that is inside the room is brought in via the fan coil and taken out, resulting into cool air flowing back into the home. Reverse cycle allows heating pumps to run in reverse in order to provide warmth on cold winter days.

Air conditioning split systems can be installed in individual rooms, zones or rooms connected by copper piping into an outdoor unit (condenser). Multi-head split air conditioning systems are able to be fitted for more than nine rooms with only one outdoor unit, as well as allowing an individual temperature control for each room.

What Are The Ongoing Costs For Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the winter and summer periods and the annual running costs would be $272.34.

The reduction of split system Operating Costs

It’s not hard to save on running expenses by using the Split System. Depending on the model that you buy, as well as its star rating will determine just how much you can save annually. It is important to look beyond the initial price to how you use Your Split System can help as well.

Tips For Operating A Split System

• Set the thermostat to 24C and 26C for cooling. Each degree less in summer will raise the cost of running by about 10%..
• Utilize the economy setting when your split has one and regularly service your air conditioning.
• Make sure that the sun’s heat is kept out by closing curtains and blinds in the morning. Close all doors and windows in areas that are cooled when you have the split unit in operation.
• When the split system has been switched off , and the cooler outside, you can open doors as well as windows in order to let the cool air circulate.
• Insulate your house to block heat out in summer and inside in winter.
• Wear clothes that are appropriate for the weather.

Why Choose A Split System?

The wall mounted air conditioning system is among the most commonly used residential air conditioning system because they’re affordable and easily to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year as it maintains the temperature constant, cuts costs (less energy consumption) and produces a lesser amount of noise when utilized. This is achieved through managing the speed of the compressor more precisely.

Affordable

Wall-mounted divided AC units are your best cost-effective option for a single room or apartment because they are relatively inexpensive to buy (depending on how many indoor units you will require) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the area it is located in, which means that each room is able to have various temperature.

Air Quality

Many Split air conditioners have air filtering and humidity control functions which control the amount dust and humidity within a room. This gives sensitive customers (children and elderly, asthmatic or allergic users) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser, which gives you the comfort of having the ideal cooling system (in terms of output and physical restrictions) for a particular room.

Split System FAQ

Are split systems the same thing as the air conditioning?

Absolutely, Split System includes an air-conditioning unit. However, there are many types of air conditioning system that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each system operates by using refrigerant and electricity. They all operate on the same principal but very different in terms.

How long will it take to install a split-system air conditioner?

In general, a single split-system air conditioner installation is expected to last between 3 and 6 hours. However, the exact amount of time can vary based on a variety of factors, such as below;

• Size and location of both outdoor and indoor unit
• The routing of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In the majority of cases, if your air conditioner is over > 10 years old and you notice noticeable issues with your A/C there’s a good likelihood that it is cheaper to replace rather than fix.

For help in making the right decision for your needs, consult with the staff at ComfyHome for an honest evaluation of the condition of your air conditioner.

What size of split system air conditioning do I need?

A common measure ratio would be to multiple the size of the room by a ratio of 0.15 to obtain the required power of the unit in kilowatt.

For a room with a size of 40 square meters, you will have a Split system air conditioning unit of 6 kW. A unit with a cooling capacity of 2.5kW is suitable for rooms with 10-20 square meters. spaces.

However, the amount of the Split system air conditioning required can also be dependent on other factors such as how well the insulation is in place, the amount of people residing there and’ position.

For an accurate assessment of the required Split dimension, we suggest you contact us for a detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general, an air conditioner is built to last from 10-20 years, on an average. But it depends on heaps of elements, such as the model of the AC as well as the quality of the installation, regular service history, and so on…

It is vital to check the maintenance of your split system air conditioner regularly to extend its life and increase efficiency.

What is the best frequency to clean my air conditioner air filter?

Based on Daikin Australia, it is strongly recommended to cleanse your air conditioning filters every two weeks to improve the efficiency of your system and possibly reduce your energy usage by 5%-15 percentage.

Greensborough Gas Heating Services

• Evaporative Cooling Repair Greensborough
• Gas Log Fire Service & Repairs Greensborough
• Braemar Ducted Gas Heating Servicing & Repair Greensborough
• Gas Heating Service Greensborough
• Brivis Ducted Gas Heating Servicing & Repair Greensborough
• Gas Heating Greensborough
• Gas Heating Installation Greensborough
• Gas Hot Water System Installation & Repairs Greensborough
• Gas Space Heater Repair Greensborough
• Gas Heating Repairs Greensborough
• Ducted Gas Heating Servicing & Repair Greensborough
• Greensborough
• Vulcan Ducted Gas Heating Servicing & Repair Greensborough
• Carbon Monoxide Testing Greensborough
• Gas Appliance Servicing & Repair Greensborough

What Types of Systems We Service & Repair

Every brand and type of heating comes with its individual operation and maintenance requirements; our experienced technicians are knowledgeable and know how to provide the best service on all types of heating equipment, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in the field of heating repairs and maintenance that specialize in all kinds and models of heating systems. We take pride in a fast response time and dedication to efficiency, excellence and reliability.

We are able to maintain and service the majority of major brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reviews & Reputation
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Get a Quote Without obligation

Our Promise To You

We at Melbourne Gas Heating we understand the discomfort of not having hot water and it’s something we don’t think anyone should suffer through. That’s why we give an emphasis on emergencies with hot water. Our plumbers are courteous and reliable and without doubt, we are able to assist you in any circumstance.

We take pride in the quality of our customer service. It is our conviction that the little things matter the most.

We pride ourselves on our great customer service, and here’s the reason our customers are so happy with us:

• We always arrive when we promise to be there.
• Our experts will give you an appointment when they are thirty minutes away.
• Pricing upfront competitive and guidance before we start the job.
• Always taking care to clean up after us.

Our company Melbourne Gas Heating offer emergency and maintenance services in plumbing, electrical and heating. If at any time you have some questions about our services or what we provide, we are here to help.