Split System Installation Harkaway

Split System Install in Harkaway

There’s nothing better than coming home on a hot day and flipping on your split-system air-conditioning and within a matter of minutes , your home and your family is cool.

Split system air conditioning offers this versatility, which makes them tough to beat. However, like all heaters and coolers that are required to run at their best they must be maintained and serviced at a high level by skilled professionals. Melbourne Gas Heating offers experienced technicians that know your split system air conditioners both inside and outside. They specialise in all makes and models of these units providing you with peace of mind that we will finish the job at a professional level.

We offer a wide range of services that comprise the following:

• Split System Installation Harkaway
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and certified to perform all kinds of tasks. If you’re searching for [keywords lower] Harkaway services then contact Local Heating and Cooling Professionals Harkaway today and talk to one of our knowledgeable team members.

How Do Split Systems Function?

Systems for split air conditioners are their name due to half it (condenser) being outside the house , while the second half (fan coil) is located inside. When it cools, hot air that is inside the room is absorbed via the fan coil before being removed, resulting in cooling air returning to the house. In reverse mode, it allows the heat pump to run in reverse to provide heat in cold weather.

Air conditioning split systems are installed to specific rooms, zones or rooms connected by copper piping with an outside unit (condenser). Systems with multi-head splits can be set up for as many as nine rooms with just one outdoor unit and allowing for individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of our recommended brands of Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the winter and summer periods The annual operating cost would be measured at $272.34.

Reducing Costs of Split Systems Operating Costs

It’s not hard to cut down on your operating costs with a Split System. The model you purchase, and it’s respective star rating will determine just how much you can save annually. Beyond the initial cost to the way you make use of it Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat to 24C and 26C to cool. Each degree less in summer will raise the cost of running by about 10%..
• Choose the economy option in the event that your split system is equipped with one. Ensure that you regularly service your air conditioner.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds in the morning. Close all doors and windows in areas that are cooled when your split systems are running.
• When the split system has been switched off and its cooler outside, open the doors as well as windows in order to let cool air in.
• Insulate your property to help keep heat out in summer and in the winter months.
• Dress according to the weather.

Why Select A Split System?

Split air conditioners mounted on walls are the most widely owned residential air conditioning system since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year since it keeps the temperature at a constant level, reduces costs (less energy use) and generates less sound when it is employed. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted Split AC systems are the best cost-effective option for a single room, apartment or small house since they are inexpensive to buy (depending on how many indoor units you will require) and don’t need necessary duct work.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is placed in, so each room can have a different temperature.

Air Quality

A lot of split air conditioning systems include air filtering and humidity control functions which control the amount dust and humidity that can be found in a room. This gives sensitive customers (children or elderly, asthmatic or allergic customers) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser which gives you the peace of mind that you have the ideal AC (in terms of output and physical restrictions) for a particular room.

Split System FAQ

Are split systems similar to the air conditioning?

Sure, Split System has an air-conditioning system. However, there are many kinds of air conditioning systems. This which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each system operates using refrigerant and electricity, based on the same principle, but are different in terms of installation.

How long will it take to set up a split system air conditioner?

In general the typical AC split installation can take between 3-6 hours. But, the exact amount of time may vary based on a variety of factors, such as below;

• The size and location of both the outdoor and indoor unit
• The routing of copper pipes between the outdoor unit and indoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Do I need to replace or fix my AC unit?

In the majority of cases when your air conditioner is more than 10 years of age and you notice noticeable issues with your A/C There is a high possibility that it will be less expensive to replace it than to repair it.

To help you make the right decision for your needs, speak with the team at ComfyHome for an honest evaluation of the condition of your air conditioner.

What size of split system air conditioner will I require?

A typical measuring ratio will multiple the space by a ratio of 0.15 to calculate the necessary power of the device in kilowatts.

For a room with a size of 40 square metres, you’ll require a split system air conditioning unit with 6 kW. A cooling unit of 2.5kW is suitable for rooms with 10-20 square meters. areas.

However, the size of the Split system air conditioning required is also affected by other factors like the insulation in the room, the quantity of residents and’ location.

To make an accurate determination of the required Split Unit size we suggest you call us for a more detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general an air conditioner is designed to last between 10 and 20 years in the average. But it depends on heaps of elements, such as the manufacturer of the air conditioner it is installed on, the quality of its installation, routine maintenance history etc…

It is crucial to maintain the Split System air conditioner often to prolong lifetime and enhance effectiveness.

When should I wash my air conditioner air filter?

In accordance with Daikin Australia, it is strongly recommended to clean your air conditioning filters every 2 weeks to increase the system’s efficiency and potentially reduce your energy consumption by 5%-15 percentage.

Harkaway Gas Heating Services

• Gas Hot Water System Installation & Repairs Harkaway
• Carbon Monoxide Testing Harkaway
• Gas Heating Harkaway
• Harkaway
• Gas Appliance Servicing & Repair Harkaway
• Evaporative Cooling Repair Harkaway
• Gas Heating Repairs Harkaway
• Gas Heating Service Harkaway
• Gas Space Heater Repair Harkaway
• Ducted Gas Heating Servicing & Repair Harkaway
• Brivis Ducted Gas Heating Servicing & Repair Harkaway
• Braemar Ducted Gas Heating Servicing & Repair Harkaway
• Gas Heating Installation Harkaway
• Gas Log Fire Service & Repairs Harkaway
• Vulcan Ducted Gas Heating Servicing & Repair Harkaway

What Types of Systems We Service & Repair

Every brand and type of heating has it’s own maintenance and operation Our experienced technicians are knowledgeable and know how to provide first rate services on all types of heating equipment which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in repairs and maintenance of heating systems, specialising in all styles and brands of heating equipment. We are proud of our fast response time and dedication to quality, efficiency and reliability.

We service and maintain the major brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reviews & Reputation
• We’re Personable & Friendly
• Highly Experienced and Licenced Team
• Get a Free Quote and No Obligation

Our Promise To You

At Melbourne Gas Heating we understand the difficulty of not having hot water, and it’s something we do not believe anyone should be forced to endure. This is why we place top priority on hot water emergencies. All of our experienced plumbers are reliable and friendly and without doubt, we will be able to help you in all situations.

We pride ourselves on our customer service , and it is our belief that even the tiny things are the most important.

We are proud of our outstanding customer service. this is why our customers are so happy with us:

• We always show up when we tell you we will.
• Our technicians will give you the number to call them when they are 30 minutes away.
• Price upfront, competitive and professional advice before we begin the work.
• Always making sure we clean up after us.

We at Melbourne Gas Heating offer emergency and maintenance services for plumbing, electrical, and heating. If you have questions about our services and what we can offer, please contact us.