Split System Installation Kilsyth

Split System Install in Kilsyth

There’s nothing better than arriving home on a hot day of 40 degrees and flipping on your split-system air conditioning and in just a couple of minutes your house and family members are cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. But , just like all heaters or coolers to make sure they’re running to their maximum they must be maintained and serviced in a professional manner by qualified experts. Melbourne Gas Heating offers experienced technicians who know your split system air conditioners in and out. They specialize in all models and models of these units providing you with peace of mind that we can get the job done to a professional standard.

We offer a wide range of services that comprise the following:

• Split System Installation Kilsyth
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are fully qualified and licensed to complete all types of jobs. If you’re searching for split system installation Kilsyth services then contact Local Heating and Cooling Professionals Kilsyth today and talk with one of our helpful team members.

How Do Split Systems Function?

The split systems of air conditioning are their name because half of it (condenser) located outside the house , while the second half (fan coil) is inside. In cooling, hot air that is inside the room is brought in through the fan coil and taken out, resulting into cool air recirculating back into the house. Reverse cycle allows the heat pump to run in reverse to provide heating during colder days.

The split system of air conditioning can be fitted to individual rooms, areas or even multiple rooms joined by copper piping to an outdoor unit (condenser). Systems with multi-head splits can be set up in as many as nine rooms and only one outdoor unit as well as allowing separate temperature control for each room.

What Are The Running Costs For Split Systems?

One of our recommended brands of Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the summer and winter time and the annual running costs will be $272.34.

Lowering Split System Operating Costs

It’s easy to cut down on your operating costs by using a Split System. The model you purchase, and it’s respective star rating will determine how much you will save each year. Beyond the initial cost to the way you will use it Split System can help as well.

Guide to Operating A Split System

• Set the thermostat between 24C and 26C to allow for cooling. Each degree less in summer will increase your running costs by 10%..
• Choose the economy option when your split has one. You should also regularly maintain your air conditioning.
• Keep the sun’s heat away by closing the curtains and exterior blinds during the daytime. Close all doors and windows in areas that are being cooled while the split system is on.
• When the split system has been shut off and the cooler outside, it is recommended to open the doors as well as windows in order to let the cool air inside.
• Insulate your home to keep summer heat out and the cold inside in winter.
• Dress to suit the weather conditions.

Why Select Split Systems?

Split air conditioners mounted on walls are among the most commonly owned residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is the most effective way to enjoy more comfort throughout the year because it maintains the temperature constant, cuts costs (less consumption of energy) and produces a lesser amount of noise when it is used. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted Split AC systems are the most affordable option for a one room, apartment or small house since they are inexpensive to buy (depending on the amount of indoor units you require) and don’t need duct work required.

Independent Temperature Control

Each indoor unit is able to control the area it is installed within, and each space may have different temperature.

Air Quality

Many HVAC systems that are split include air filtering and humidity control features which regulate the amount of dust and humidity in a room. This provides those with sensitive skin (children or elderly, asthmatic or allergic users) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser which provides the comfort of having the perfect AC (in terms of output and physical constraints) to a specific space.

Split System FAQ

Are split systems the same as an air conditioner?

It is true that Split System includes an air-conditioning unit. However, there are many kinds of air conditioning systems. These include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each system operates with refrigerant and electricity under the same principal but very different in terms.

How long will it take to set up a split system air conditioner?

In general for a single AC split installation will take 3-6 hours. But, the exact amount of time can vary based on various factors like the following:

• Dimensions and position of both indoor and outdoor unit
• Copper pipes that are routed between the outdoor unit and the indoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority cases the air conditioner is more than 10 years and you have obvious issues with your AC there’s a great likelihood that it is cheaper to replace then repair.

To assist you in making the right decision To make the right choice, talk to the experts at ComfyHome to give you an honest opinion on the state of your air conditioner.

What size of split system air conditioning do I need?

A common measurement ratio is to multiply the space by a factor of 0.15 to get the needed power of the measurement unit in kilowatts.

For a room with a size of 40 square metres, you’ll need a Split air conditioning system of 6 kW. A cooling unit of 2.5kW is the ideal size for 10-20 square meter room areas.

However, the amount of the Split system air conditioning required can be affected by other variables such as the insulation in the room, the amount of people residing there and’ position.

To get an accurate estimate of the needed Split Unit size please contact us for a detailed analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is constructed to last for 10-20 years on an average. However, this is contingent upon a myriad of elements, such as the manufacturer of the air conditioner it is installed on, the quality of its installation, regular service history, and so on…

It is crucial to maintain the Split System air conditioner regularly to extend its life and increase efficiency.

How often should I wash my air conditioner air filter?

Based on Daikin Australia, it is strongly suggested that you should cleanse your air conditioning filters every two weeks to improve the system’s efficiency and potentially reduce your energy usage by 5 to 15%.

Kilsyth Gas Heating Services

• Vulcan Ducted Gas Heating Servicing & Repair Kilsyth
• Gas Log Fire Service & Repairs Kilsyth
• Gas Space Heater Repair Kilsyth
• Braemar Ducted Gas Heating Servicing & Repair Kilsyth
• Ducted Gas Heating Servicing & Repair Kilsyth
• Gas Heating Kilsyth
• Kilsyth
• Gas Heating Repairs Kilsyth
• Evaporative Cooling Repair Kilsyth
• Brivis Ducted Gas Heating Servicing & Repair Kilsyth
• Gas Appliance Servicing & Repair Kilsyth
• Carbon Monoxide Testing Kilsyth
• Gas Heating Installation Kilsyth
• Gas Hot Water System Installation & Repairs Kilsyth
• Gas Heating Service Kilsyth

What Types of Systems We Service & Repair

Each model and brand of heating requires its own maintenance and operation; our experienced technicians are equipped with the expertise and experience to offer the best service for all heating systems for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in heating repairs and maintenance and specialize in all types and models of heating systems. We take pride in a rapid response time and dedication to quality, efficiency and reliability.

We service and maintain the majority of major brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reviews & Reputation
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Get a Quote With No Obligation

Our Promise To You

At Melbourne Gas Heating we understand the difficulty of not having hot water. This is something we do not believe anyone should have to experience. That’s why we give an emphasis on emergencies involving hot water. Our plumbers are trustworthy and friendly and without doubt, we will be able to assist you in any situation.

We pride ourselves on the quality of our customer service. It is our firm belief that the minor things matter most.

We are proud of our great customer service, this is why our customers love us:

• We always show up when we tell you we will.
• Our experts will give you the number to call them when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we begin the work.
• Always taking care to clean up after our own mess.

We at Melbourne Gas Heating offer emergency and maintenance services for plumbing, heating, and electrical. If you have some questions about our services, and the services we can offer, please contact us.