Split System Installation Monbulk

Split System Installation in Monbulk

There’s nothing more satisfying than coming to your home on a hot 40 degree day switching on your split system air conditioning, and in a matter of seconds, the house and your family will be cool.

Split system air conditioning provides such flexibility, which makes them difficult to beat. Like all heaters and coolers that are required to run at their best they should be serviced and maintained in a professional manner by qualified professionals. Melbourne Gas Heating offers experienced technicians who know your split system air-conditioners both inside and outside. They specialize in all brands and models of these units providing you with assurance that they are able to complete the task in a professional manner.

We provide a variety of different Split System Installation services which include the following:

• Split System Installation Monbulk
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling is licensed and qualified to perform all kinds of work. If you’re in search of split system installation in Monbulk services then contact Local Heating and Cooling Professionals Monbulk today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Split air conditioning systems get their name because half of it (condenser) located outside the home, while the other half (fan coil) is located inside. In cooling, warm air from inside the room is drawn in by the fan coil and is then removed, which results in cool air recirculating back into the house. The reverse cycle permits your heat pump operate in reverse in order to provide warmth during cold days.

Systems for split air conditioners are installed to specific rooms, areas or multiple rooms that are connected via copper pipes into an outdoor unit (condenser). Multi-head split air conditioning systems can be set up for as many as nine rooms, with only one outdoor unit as well as allowing individual temperature control of each room.

What Are The Ongoing Costs For Split Systems?

One of the most recommended brands that we recommend for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the summer and winter months The annual operating cost would be $272.34.

The reduction of the Split System Running Costs

It’s not hard to save on running expenses by using the Split System. Based on the model you purchaseand its star rating will determine just how you’ll save each year. But looking beyond the initial cost to how you utilize it Split System can help as well.

Guide to Using Split Systems

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Every degree lower in summer increases the running cost by 10%..
• Make use of the economy setting when your split has one. You should also regularly maintain your air conditioning.
• Keep the sun’s heat away by closing curtains as well as external blinds in the morning. Close doors and windows to areas being cooled when you have the split unit on.
• When the split system is switched off and its cooler outside, open doors and windows to let cool air in.
• Insulate your property to help keep summer heat out and the cold in the winter months.
• Dress appropriately for the weather.

Why Select A Split System?

The wall mounted air conditioning system is among the most commonly used residential air conditioning system, as they are affordable and easily to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year as it maintains the temperature at a constant level, reduces costs (less consumption of energy) and generates less sound when it is employed. This is achieved by managing the speed of the compressor more precisely.

Affordable

Wall-mounted Split AC models are best cost-effective option for a single room apartment, small home or even a studio because they are relatively inexpensive to buy (depending on the number of indoor units you will require) and there is no necessary duct work.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is installed in, which means that each room can have a different temperatures.

Air Quality

Many split air conditioning systems include air filtering and humidity control functions which regulate the amount of dust and humidity inside a room. This allows for sensitive customers (children and elderly, asthmatic or allergic consumers) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to one outdoor condenser which provides the convenience of having the most suitable AC (in terms of output and physical restrictions) to a specific space.

Split System FAQ

Are split systems the same as one would expect from an air conditioner?

Absolutely, Split System is an air conditioning system. But, the different kinds of air conditioning systems. These which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each of these systems operates using refrigerant and electricity, based on the same principal but very different in terms of how they are installed.

How long will it take to install a split system air conditioner?

In general an individual split system air conditioning installation is expected to last between 3 and 6 hours. However, the exact amount of time may vary based on various factors like below;

• Size and location of both outdoor and indoor unit
• The routing of copper pipes between the outdoor unit and indoor unit
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Do I need to replace or fix my cooling system?

In most situation in the event that your air conditioner is more than 10 years and has obvious issues with your AC there’s a great likelihood that it is cheaper to replace then repair.

In order to help you make the right choice It is recommended to contact the experts at ComfyHome for an honest evaluation of the condition of your air conditioner.

What size of split system air conditioning do I need?

A typical measure ratio would be to multiple the room area by a ratio of 0.15 to get the needed power of the device in kilowatts.

For a room with a size of 40 square meters, you will require a split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is suitable for 10-20 square meter room areas.

However, the size of the Split system air conditioning required can be affected by other factors like the insulation in the room, the amount of people residing there and’ place of residence.

For an accurate assessment of the needed Split unit size, we suggest that you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general an air conditioner is constructed to last for 10-20 years on average. However, it is contingent on a variety of elements, such as the brand of the A/C, quality of the installation, routine maintenance history etc…

It is crucial to maintain the Split System air conditioner often to extend its life and increase efficiency.

What is the best frequency to wash my air conditioner’s air filter?

Based on Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every two weeks to improve the system’s efficiency and potentially decrease your energy use by 5%-15 percentage.

Monbulk Gas Heating Services

• Vulcan Ducted Gas Heating Servicing & Repair Monbulk
• Gas Heating Service Monbulk
• Gas Space Heater Repair Monbulk
• Evaporative Cooling Repair Monbulk
• Gas Heating Repairs Monbulk
• Gas Heating Monbulk
• Gas Log Fire Service & Repairs Monbulk
• Gas Appliance Servicing & Repair Monbulk
• Brivis Ducted Gas Heating Servicing & Repair Monbulk
• Carbon Monoxide Testing Monbulk
• Braemar Ducted Gas Heating Servicing & Repair Monbulk
• Ducted Gas Heating Servicing & Repair Monbulk
• Monbulk
• Gas Heating Installation Monbulk
• Gas Hot Water System Installation & Repairs Monbulk

What Types of Systems We Service & Repair

Each brand and style of heating has it’s individual operation and maintenance requirements; our experienced technicians are knowledgeable and know how to provide the best service on all types of heating equipment, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in repairs and maintenance of heating systems, specialising in all styles and types of heating systems. We pride ourselves on having a fast response time and dedication to quality, efficiency and reliability.

We are able to service and maintain all top brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Great Reviews & Reputation
• We’re friendly, personable and polite.
• Highly Experienced and Licenced Team
• Request a Quote with No obligation

Our Promise To You

We at Melbourne Gas Heating we understand the discomfort of not having hot water, and it’s something we believe no one should be forced to endure. This is why we place such a high priority on emergencies involving hot water. Our plumbers are reliable and friendly Without a doubt, we can assist you in any circumstance.

We are proud of the quality of our customer service. It is our firm belief that the tiny things are the most important.

We are proud of our excellent customer service. this is why our customers love us:

• We always show up when say we will.
• Our technicians will give you a call when they are 30 minutes away.
• Pricing upfront competitive and guidance before we even begin the job.
• Always cleaning up after us.

Our company Melbourne Gas Heating offer emergency and maintenance services in plumbing, electrical, and heating. If at any time you are unsure about our services or what we can provide.