Split System Installation Narre Warren North

Split System Install in Narre Warren North

There’s nothing more enjoyable than coming home from a scorching day and turning on your split system air-conditioning and within a matter of minutes the house and your family are cool.

Split system air conditioning provides such the ability to be used in a variety of ways, making them difficult to beat. But , just like all heaters or coolers to make sure they’re running to their maximum, they need to be serviced and maintained at a high level by skilled professionals. Melbourne Gas Heating offers experienced technicians who are familiar with split system air-conditioners inside and out. They specialize in all brands and models giving you the assurance that we are able to complete the task to a professional standard.

We offer a variety of services that comprise the following:

• Split System Installation Narre Warren North
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and fully trained to perform all kinds of tasks. If you’re searching for [keywords lower] Narre Warren North services then contact Local Heating and Cooling Professionals Narre Warren North today and talk with one of our helpful team members.

How Do Split Systems Function?

Systems for split air conditioners earn their name because half of this system (condenser) being located outside the home, while the other part (fan coil) is inside. While cooling, warm air inside the room is taken in by the fan coil and is then removed, which results in cool air flowing back into the home. In reverse mode, it allows your heat pump operate in reverse in order to provide warmth during cold days.

Systems for split air conditioners can be installed in individual rooms, zones or rooms connected by copper piping with an outside unit (condenser). Systems with multi-head splits can be set up in as many as nine rooms and just one outdoor unit as well as allowing the control of temperature for each room.

What Are The Running Costs With Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the summer and winter months, the annual running cost would be measured at $272.34.

Reduced the Split System Operating Costs

It’s not difficult to save on running expenses with a Split System. Based on the model you purchase, and it’s respective star rating will determine just how much you’ll save per year. It is important to look beyond the initial cost to the way you make use of your Split System can help as well.

Guide to Using Split Systems

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Each degree less in summer will increase your running costs by 10%..
• Use the economy setting if your split system has one. You should also regularly maintain your air cooling system.
• Keep the sun’s heat away by closing the curtains and exterior blinds in the morning. Close doors and windows to areas that are cooling when your split systems are running.
• If the split system is switched off , and the cooler outside, it is recommended to open the doors or windows and let the cool air in.
• Insulate your house to block the cool summer air out and keep the heat in during winter.
• Wear clothes that are appropriate for the weather.

Why Choose A Split System?

Wall mounted split air conditioning systems are the most frequently owned residential air conditioning system since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout all seasons since it ensures the temperature constant, cuts costs (less energy consumption) and generates less sound when it is employed. This is achieved by controlling the compressor rotation speed more precisely.

Affordable

Wall mounted Split AC models are best economical option for a single room apartment, small home or even a studio since they are inexpensive to buy (depending on the number of indoor units you’ll need) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit is able to control the area it is situated in, so each room is able to have different temperatures.

Air Quality

Many Split air conditioners have air filtering and humidity control functions which control the amount dust and humidity inside a room. This provides those with sensitive skin (children or elderly, asthmatic or allergic customers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser that in turn provides you with the convenience of having the most suitable cooling system (in terms of physical and output constraints) for a specific room.

Split System FAQ

Are split systems similar to the air conditioning?

Absolutely, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. It includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each system operates using refrigerant and electricity, based on the same principles, however they are different in term of installation.

How long does it take to install a split system air conditioner?

In general for a single AC split installation will last between 3 and 6 hours. But, the exact amount of time will depend on a variety of factors, such as below:

• Size and location of both outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and the indoor unit
• Electrical connections from main switchboard up to the AC unit

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of cases in the event that your air conditioner is more than 10 years old and you notice noticeable issues with your A/C there’s a good chance that it’s cheaper to replace then repair.

For help in making the right decision, it is best to consult with the staff at ComfyHome to get an honest evaluation of the condition of your air conditioner.

What size of split system air conditioner do I need?

The standard measure ratio would be to multiple the size of the room by a factor of 0.15 to obtain the required power of the unit in kilowatt.

For a room with a size of 40 square meters, you will require a split system air conditioning unit of 6 kW. A unit with a cooling capacity of 2.5kW is perfect for 10 -20 sqm room areas.

The size of the Split system’s air conditioning will also be affected by other variables like the room insulation, quantity of residents and’ place of residence.

To make an accurate determination of the needed Split dimension, please get in touch with us to request a thorough analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general the air conditioner is built to last 10-20 years on an average. But this depends on a lot of variables, including the model of the AC it is installed on, the quality of its installation, routine maintenance history etc…

It is vital to check the maintenance of your split system air conditioner on a regular basis to extend its lifespan and improve effectiveness.

How often should I wash my air conditioner’s air filter?

According to Daikin Australia, it is highly recommended that you take care to clean your air conditioning filter every two weeks to improve the efficiency of the system and reduce your energy consumption by 5%-15%.

Narre Warren North Gas Heating Services

• Brivis Ducted Gas Heating Servicing & Repair Narre Warren North
• Vulcan Ducted Gas Heating Servicing & Repair Narre Warren North
• Gas Heating Repairs Narre Warren North
• Gas Appliance Servicing & Repair Narre Warren North
• Carbon Monoxide Testing Narre Warren North
• Gas Heating Installation Narre Warren North
• Narre Warren North
• Evaporative Cooling Repair Narre Warren North
• Gas Space Heater Repair Narre Warren North
• Braemar Ducted Gas Heating Servicing & Repair Narre Warren North
• Gas Heating Narre Warren North
• Gas Heating Service Narre Warren North
• Gas Log Fire Service & Repairs Narre Warren North
• Gas Hot Water System Installation & Repairs Narre Warren North
• Ducted Gas Heating Servicing & Repair Narre Warren North

What Types of Systems We Service & Repair

Each type and brand of heating system has its specific operation and maintenance needs Our skilled technicians have the knowledge and experience to offer first rate services to all systems of heating, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in the field of heating repairs and maintenance, specialising in all styles and models of heating systems. We are proud of our fast response time and dedication to excellence, efficiency , and reliability.

We are able to service and maintain the majority of important brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reviews & Reputation
• We’re Personable & Friendly
• A Team of Experienced and Licenced Professionals
• Get a Free Quote and No Costs

Our Promise To You

We at Melbourne Gas Heating we understand the inconvenience of not having any hot water, and it’s something we don’t think anyone should suffer through. That’s why we give the highest priority for hot water emergencies. All of our experienced plumbers are trustworthy and friendly and without doubt, we can assist you in any circumstance.

We take pride in our service to customers and it is our firm belief that the minor things matter most.

We are proud of our great customer service, this is why our customers are so happy with us:

• We always show up when declare that we will.
• Our techs will give you a an appointment when they are thirty minutes away.
• Price upfront, competitive and professional advice prior to the start of the project.
• Always taking care to clean up after ourselves.

We at Melbourne Gas Heating offer emergency and maintenance services for plumbing, electrical and heating. If at any time you have questions about our services or what we provide, we are here to help.