Split System Installation Wandin North

Split System Install in Wandin North

There’s nothing better than coming home on a hot day of 40 degrees and switching on your split system air conditioning, and in a matter of minutes , your home and your family are cool.

Split system air conditioning offers this versatility, which makes them tough to beat. However, like all heaters and coolers to make sure they’re running to their maximum they should be checked and maintained to the highest standard by experienced professionals. Melbourne Gas Heating offers experienced technicians who are familiar with split system air-conditioners inside and out. They specialise in all makes and models providing you with assurance that we will complete the task to a professional standard.

We provide a variety of services that comprise the following:

• Split System Installation Wandin North
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are licensed and certified to perform all kinds of tasks. If you are looking for split system installation in Wandin North services then contact Local Heating and Cooling Professionals Wandin North today and talk with one of our helpful team members.

How Do Split Systems Operate?

Systems for split air conditioners earn their name because half of the system (condenser) being outside the house while the other half (fan coil) is installed inside. In cooling, warm air from inside the room is absorbed through the fan coil and removed, resulting in cool air recirculating back into the house. While reverse cycle allows for heating pumps to run in reverse to provide heat on cold winter days.

The split system of air conditioning can be installed to specific rooms, zones or rooms joined by copper piping with an outside unit (condenser). Multi-head split air conditioning systems can be used in at least nine rooms, with just one outdoor unit and allow for the control of temperature for each room.

What Are The Ongoing Costs With Split Systems?

One of the brands we recommend to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the winter and summer periods, the annual running cost will be $272.34.

The reduction of Split System Running Costs

It’s not difficult to cut down on your operating costs by using a Split System. Depending on the model that you purchase, and it’s respective star rating, you will be able to determine how much you’ll save per year. It is important to look beyond the initial price to how you use the Split System can help as well.

Tips For Operating A Split System

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Any degree lower than that will raise the cost of running by approximately 10%..
• Utilize the economy setting in the event that your split system is equipped with one and regularly service your air conditioning.
• Keep the sun’s heat out by closing curtains and external blinds during the day. Close the doors and windows of areas that are cooling when the split system is operating.
• When the split system has been turned off and the cooler is outside, you can open doors along with windows, allowing the cool air in.
• Insulate your residence to prevent cool summer air out and keep the heat inside in winter.
• Dress appropriately for the weather conditions.

Why Choose A Split System?

Split air conditioners mounted on walls are the most widely used residential air conditioning system since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year since it keeps an even temperature, helps save costs (less consumption of energy) and generates less sound when it is used. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall mounted wall mounted split AC models are most affordable option for a one room, apartment or small house since they are inexpensive to buy (depending on the number of indoor units you require) and do not require duct work required.

Independent Temperature Control

Each indoor unit is able to control the temperature of the room it is placed in, so each room may have different temperatures.

Air Quality

Many HVAC systems that are split feature air filtering functions and humidity control which regulate the amount of dust and humidity in a room. This gives sensitive customers (children, elderly, asthmatic or allergic users) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to one outdoor condenser, which in turn gives you the comfort of having the most suitable cooling system (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Is a split system similar to an air conditioner?

Absolutely, Split System can be described as an air conditioner system. However, there are many kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates with refrigerant and electricity under the same principle but they are different in terms of how they are installed.

What is the time frame to install a split-system air conditioner?

Generally speaking the typical split air conditioning system installation is expected to last between 3 and 6 hours. However, the exact amount of time may vary based on a variety of factors, such as below;

• Size and location of both the outdoor and indoor unit
• Copper pipes that are routed between indoor and outdoor unit
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In most situation, if your air conditioner is at least 10 years old and you notice obvious issues with your AC there’s a good chance that it could be cheaper to replace then repair.

To help you make the right choice for your needs, speak with the team at ComfyHome to get an honest assessment on the condition of your air conditioner.

What size of split system air conditioning do I need?

The standard measurement ratio is to multiply the space by a ratio of 0.15 to calculate the necessary power of the unit in Kilowatts.

If you have a room size that is 40 sqm, you’ll have a Split system air conditioning unit of 6 kW. A unit that can cool the air at 2.5kW is suitable for 10-20 square meter room areas.

However, the size of the Split system’s required air conditioning can be dependent on other factors such as how well the insulation is in place, the amount of people residing there and’ location.

To get an accurate estimate of the required Split unit size, we recommend you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general an air conditioner is built to last from 10-20 years on average. However, this is contingent upon a myriad of factors such as the model of the AC it is installed on, the quality of its installation, routine maintenance history and more…

It is crucial to maintain the Split System air conditioner often for a longer life span and to increase efficiency.

Do I need to wash my air conditioner air filter?

According to Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every two weeks in order to boost the efficiency of the system, and ultimately reduce your energy usage by 5 to 15%.

Wandin North Gas Heating Services

• Gas Log Fire Service & Repairs Wandin North
• Wandin North
• Gas Hot Water System Installation & Repairs Wandin North
• Vulcan Ducted Gas Heating Servicing & Repair Wandin North
• Gas Heating Installation Wandin North
• Gas Space Heater Repair Wandin North
• Ducted Gas Heating Servicing & Repair Wandin North
• Braemar Ducted Gas Heating Servicing & Repair Wandin North
• Gas Appliance Servicing & Repair Wandin North
• Carbon Monoxide Testing Wandin North
• Gas Heating Service Wandin North
• Brivis Ducted Gas Heating Servicing & Repair Wandin North
• Gas Heating Wandin North
• Evaporative Cooling Repair Wandin North
• Gas Heating Repairs Wandin North

What Types of Systems We Service & Repair

Every brand and type of heating has it’s own operation and maintenance Our highly skilled technicians have the insight and expertise to provide top-quality services across all kinds of heaters for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in repairs and maintenance of heating systems that specialize in all kinds and brands of heating equipment. We pride ourselves on a rapid response time as well as a commitment to efficiency, excellence and reliability.

We can service and maintain the majority of leading brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re personable and friendly
• Experienced & Licenced Team
• Get a Free Quote and No Obligation

Our Promise To You

We at Melbourne Gas Heating we understand the frustration of not having hot water. It’s a situation we don’t think anyone should suffer through. This is why we place such a high priority for hot water emergencies. Our experienced plumbers are friendly and trustworthy Without a doubt, we will be able to help you in all situations.

We pride ourselves on our customer service , and it is our belief that the little things matter the most.

We take pride in our great customer service, Here’s why our clients love us:

• We always show up when we tell you we will.
• Our experts will give you an appointment when they are thirty minutes away.
• Price upfront, competitive and professional advice before we begin the work.
• Always cleaning up after ourselves.

At Melbourne Gas Heating offer emergency and maintenance services for plumbing, electrical and heating. If at any time you have any questions regarding our services, and the services we can offer, please contact us.