Split System Installation Heidelberg

Split System Installation in Heidelberg

There’s nothing better than arriving to your home on a hot 40-degree day, switching on your split system air conditioning and in a matter of seconds, the house and your family is cool.

Split system air conditioning offers this versatility, making them hard to beat. But like all heaters and coolers to keep them running at their peak they must be maintained and maintained to the highest standard by skilled professionals. Melbourne Gas Heating offers experienced technicians who are familiar with split system air-conditioners from top to bottom. They specialize in all models and models of these units providing you with peace of mind that we will finish the job at a professional level.

We offer a wide range of different Split System Installation services which include the following:

• Split System Installation Heidelberg
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and certified to perform all kinds of tasks. If you’re looking for split system installation Heidelberg services then contact Local Heating and Cooling Professionals Heidelberg today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Air conditioning splits get their name because half of it (condenser) located outside the house while the other portion (fan coil) is inside. While cooling, warm air in the room is brought in from the fan coil before being taken out, resulting into cooling air returning to the home. While reverse cycle allows for heating pumps to operate in reverse to provide heating during colder days.

The split system of air conditioning are installed in individual rooms, areas or multiple rooms connected by copper piping with an outside unit (condenser). Multi-head split air conditioning systems can be used for at least nine rooms using just one outdoor unit as well as allowing separate temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of our recommended brands to use for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating during the summer and winter time The annual operating cost is $272.34.

Reduced split system Running Costs

It’s not difficult to save on running expenses with a Split System. Depending on the model that you purchase, and it’s respective star rating will determine just how much you can save annually. Beyond the initial cost and how you use it Split System can help as well.

Tips For Using A Split System

• Set the thermostat between 24C and 26C for cooling. Every degree lower in summer increases the running cost by 10%..
• Make use of the economy setting if your split system has one. Ensure that you regularly service your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains and blinds during the daytime. Close doors and windows to areas that are being cooled while you have the split unit operating.
• When the split system has been turned off and the cooler is outside, it is recommended to open the doors along with windows, allowing cool air flow in.
• Insulate your house to block heat out in summer and in the winter months.
• Wear clothes that are appropriate for the weather.

Why Choose A Split System?

Air conditioning units mounted in wall are the most frequently owned residential air conditioning system since they are inexpensive and easily to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year because it maintains the temperature constant, cuts costs (less energy consumption) and produces a lesser amount of sound when it is employed. This is achieved by controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted split AC system are best affordable option for a one room apartment or small house as they are relatively cheap to purchase (depending on the amount of indoor units you require) and don’t need installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is located within, and each space could have different temperature.

Air Quality

Many Split air conditioners include air filters and humidity control mechanisms which control the amount dust and humidity within the space. This allows for sensitive customers (children and elderly, asthmatic or allergic consumers) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser which gives you the peace of mind that you have the ideal air conditioner (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Are split systems the same as the air conditioning?

Sure, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. It include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each system operates with refrigerant and electricity under the same principle, but are different in term of installation.

How long does it take to set up a split system air conditioner?

In general, a single AC split installation should be completed in 3-6 hours. But, the exact amount of time could vary based on various factors like below;

• Dimensions and position of both indoor and outdoor unit
• The copper pipes are routed between outdoor and indoor units
• Electrical connections from the main switchboard to the A/C unit

More Split System FAQ's

Do I need to replace or fix my AC unit?

In the majority cases, if your air conditioner is over > 10 years and has obvious issues with your AC There is a high likelihood that it is less expensive to replace it than to repair it.

To assist you in making the best decision, it is best to consult with the staff at ComfyHome for an honest and accurate assessment of the condition of your AC.

What size of split system air conditioner do I need?

A common measurements ratio is multiply the space by a ratio of 0.15 to obtain the required power of the device in kilowatts.

For a space of 40sqm, you should require a split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is the ideal size for 10-20 square meter room areas.

However, the size of the Split system’s air conditioning can be affected by other variables such as how well the insulation is in place, the amount of people residing there and’ location.

To make an accurate determination of the required Split Unit size we recommend you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is constructed to last for 10-20 years in the an average. But it depends on heaps of variables, including the model of the AC as well as the quality of the installation, routine service history etc…

It is crucial to maintain the Split System air conditioner often for a longer life span and to increase effectiveness.

Do I need to clean my air conditioner air filter?

According to Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every 2 weeks to increase the system’s efficiency and potentially reduce your energy consumption by 5%-15%.

Heidelberg Gas Heating Services

• Gas Heating Heidelberg
• Gas Heating Repairs Heidelberg
• Braemar Ducted Gas Heating Servicing & Repair Heidelberg
• Gas Appliance Servicing & Repair Heidelberg
• Gas Heating Service Heidelberg
• Evaporative Cooling Repair Heidelberg
• Vulcan Ducted Gas Heating Servicing & Repair Heidelberg
• Gas Log Fire Service & Repairs Heidelberg
• Gas Space Heater Repair Heidelberg
• Carbon Monoxide Testing Heidelberg
• Gas Hot Water System Installation & Repairs Heidelberg
• Brivis Ducted Gas Heating Servicing & Repair Heidelberg
• Gas Heating Installation Heidelberg
• Heidelberg

What Types of Systems We Service & Repair

Each model and brand of heating has it’s own maintenance and operation; our experienced technicians are knowledgeable and experience to offer first rate services across all kinds of heaters which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in the field of heating repairs and maintenance and specialize in all types and types of heating systems. We pride ourselves on having a fast response time and dedication to quality, efficiency and reliability.

We can service and maintain all major brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re personable and friendly
• Highly Experienced and Licenced Team
• Get a Free Quote and No obligation

Our Promise To You

We at Melbourne Gas Heating we understand the inconvenience of not having any hot water, and it’s something we do not believe anyone should have to experience. This is why we put an emphasis for hot water emergencies. Our plumbers are trustworthy and friendly, without a doubt we are able to assist you in all situations.

We take pride in the quality of our customer service. It is our belief that the little things matter the most.

We pride ourselves on our exceptional customer service. Here’s why our clients are so happy with us:

• We always show up when we declare that we will.
• Our technicians will give you the number to call them when they are thirty minutes away.
• Price upfront, competitive and professional advice before we start the job.
• Always taking care to clean up after us.

Our company Melbourne Gas Heating offer emergency and maintenance services for electrical, plumbing and heating. If you have questions about our services and the products we can provide.