Split System Installation Upwey

Split System Install in Upwey

There’s nothing more satisfying than coming home from a scorching 40-degree day, switching on your split system air conditioning and in just a couple of minutes your house and your family is cool.

Split system air conditioning provides such the ability to be used in a variety of ways, making them difficult to beat. Like all heaters and coolers to make sure they’re running at their best they should be serviced and maintained to a high standard by experienced professionals. Melbourne Gas Heating offers experienced technicians who are familiar with split system air conditioners from top to bottom. They specialize in all models and models of these units and give you assurance that they will complete the task to professional standards.

We provide a range of services, which include the following:

• Split System Installation Upwey
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and fully trained to perform all kinds of work. If you’re in search of split system installation in Upwey services then contact Local Heating and Cooling Professionals Upwey today and talk with one of our helpful team members.

How Do Split Systems Function?

The split systems of air conditioning have their name due to half that system (condenser) located outside the house , while the second portion (fan coil) is inside. When it cools, warm air in the room is taken in via the fan coil and eliminated, resulting in cool air being recirculated back into the house. The reverse cycle permits your heat pump run in reverse in order to provide warmth on cold winter days.

Split air conditioning systems are installed in individual rooms, areas , or rooms connected by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads can be set up for as many as nine rooms using only one outdoor unit, permitting the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of the most recommended brands for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating during the winter and summer periods, the annual running cost would be measured at $272.34.

Lowering the Split System Operating Costs

It’s not difficult to cut down on your operating costs by using a Split System. The model you buy, as well as its star rating will determine how you’ll save each year. It is important to look beyond the initial price to how you will use Your Split System can help as well.

Tips For Using A Split System

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Each degree less in summer increases the running cost by around 10%.
• Make use of the economy setting If your split system comes with one. Also, you should regularly check the condition of your air conditioning.
• Keep the sun’s heat away by closing the curtains and exterior blinds in the morning. Close all doors and windows in areas being cooled when you have the split unit on.
• When the split system has been turned off and the cooler is outside, open the doors and windows to let cool air inside.
• Insulate your property to help keep the warm summer days out and cool in the winter months.
• Dress appropriately for the weather.

Why Select Split Systems?

Air conditioning units mounted in wall are the most commonly used residential air conditioning system since they are inexpensive and easily to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year as it maintains an even temperature, helps save costs (less energy use) and produces relatively less noise when employed. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall mounted split AC system are most cost-effective option for a single room apartment, small home or even a studio because they are relatively inexpensive to buy (depending on how many indoor units you need) and there is no necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the room that it is placed in, which means that each room is able to have various temperature.

Air Quality

A lot of Split air conditioners come with air filters and humidity control mechanisms that control the amount of dust and humidity inside the space. This gives sensitive customers (children and elderly, asthmatic or allergic people) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to a single outdoor condenser which in turn gives you the comfort of having the ideal air conditioner (in terms of output and physical limitations) for a particular room.

Split System FAQ

Is a split system the same as an air conditioner?

Absolutely, Split System has an air-conditioning system. However, there are different kinds of air conditioning systems. This which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate by using refrigerant and electricity. They all operate on the same principal but very different in term of installation.

What is the time frame to install a split system air conditioner?

In general for a single split-system air conditioner installation can take 3-6 hours. But, the exact amount of time may vary based on many factors such as below;

• Size and location of both the outdoor and indoor unit
• The route of copper pipes between indoor and outdoor unit
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In most situation when your air conditioner is over > 10 years of age and there are obvious issues with your AC there’s a good chance that it could be cheaper to replace rather than fix.

For help in making the right choice, it is best to contact the experts at ComfyHome to give you an honest assessment on the condition of your air conditioner.

What size of split system air conditioning do I need?

The standard measuring ratio will multiple the room area by a factor of 0.15 to get the needed power of the unit in kilowatt.

For a room area of 40 square meters, you will need a Split system air conditioning unit that is 6 kW. A unit with a cooling capacity of 2.5kW is suitable for 10-20 sqm rooms areas.

However, the size of the Split system’s air conditioning requirements can be affected by other factors like the room insulation, number of occupants and residents’ location.

To get an accurate estimate of the Split unit size, we recommend you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does an air conditioner split system last?

In general the air conditioner is designed to last between 10 and 20 years, on average. But it depends on heaps of factors such as the manufacturer of the air conditioner as well as the quality of the installation, the routine maintenance history etc…

It is vital to check the maintenance of Your Split System AC on a regular basis for a longer life span and to increase efficiency.

When should I wash my air conditioner’s filter?

In accordance with Daikin Australia, it is strongly recommended that you clean your air conditioning filters every 2 weeks to increase the system’s efficiency and potentially reduce your energy consumption by 5%-15 percent.

Upwey Gas Heating Services

• Evaporative Cooling Repair Upwey
• Carbon Monoxide Testing Upwey
• Gas Appliance Servicing & Repair Upwey
• Brivis Ducted Gas Heating Servicing & Repair Upwey
• Gas Space Heater Repair Upwey
• Upwey
• Ducted Gas Heating Servicing & Repair Upwey
• Gas Heating Service Upwey
• Gas Hot Water System Installation & Repairs Upwey
• Vulcan Ducted Gas Heating Servicing & Repair Upwey
• Gas Heating Upwey
• Gas Heating Repairs Upwey
• Braemar Ducted Gas Heating Servicing & Repair Upwey
• Gas Log Fire Service & Repairs Upwey
• Gas Heating Installation Upwey

What Types of Systems We Service & Repair

Every brand and type of heating comes with its own maintenance and operation Our skilled technicians have the knowledge and experience to offer the best service for all heating systems for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in the field of heating repairs and maintenance with a focus on all models and brands of heating equipment. We are proud of our rapid response time and dedication to excellence, efficiency , and reliability.

We are able to maintain and service all top brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re friendly and personable.
• Highly Experienced and Licenced Team
• Request a Quote with No Obligation

Our Promise To You

We at Melbourne Gas Heating we understand the difficulty of not having hot water, and it’s something we believe no one should have to experience. This is why we put an emphasis on hot water emergencies. Our plumbers are reliable and friendly Without a doubt, we will be able to assist you in any circumstance.

We are proud of our customer service and it is our belief that even the tiny things are the most important.

We take pride in our great customer service, and here’s the reason our customers appreciate us:

• We always arrive when we say we will.
• Our staff will give you a call when they are thirty minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always making sure we clean up after ourselves.

At Melbourne Gas Heating offer emergency and maintenance services in electrical, plumbing and heating. If you are unsure about our services and what we offer.