Split System Installation Burwood

Split System Install in Burwood

There’s nothing better than arriving home to a 40 degree day activating your split system air-conditioning and within a matter of minutes your house and family members are cool.

Split system air conditioning offers this versatility, making them hard to beat. But , just like all heaters or coolers that are required to run at their peak they must be serviced and maintained to a high standard by experienced professionals. Melbourne Gas Heating offers experienced technicians who know your split system air conditioners both inside and outside. They specialize in all models and models and give you assurance that they will finish the job at a professional level.

We provide a range of services that comprise the following:

• Split System Installation Burwood
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and certified to perform all kinds of work. If you’re searching for Split System Installation Burwood services then contact Local Heating and Cooling Professionals Burwood today and talk with one of our friendly team members.

How Do Split Systems Work?

Systems for split air conditioners earn their name because of half this system (condenser) being located outside the house , while the other half (fan coil) is inside. In cooling, warm air inside the room is absorbed from the fan coil before being is then removed, which results in cool air flowing back into the home. The reverse cycle permits the heat pump to run in reverse to provide heating during cold days.

Systems for split air conditioners are fitted to individual rooms, zones or rooms that are connected via copper pipes to an outdoor unit (condenser). Multiple-headed split-air conditioning units can be used for at least nine rooms, with only one outdoor unit, and allow for an individual temperature control for each room.

What Are The Running Costs With Split Systems?

One of the top brands of Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the winter and summer periods The annual running expense will be $272.34.

The reduction of Costs of Split Systems Running Costs

It’s not hard to lower your running expenses by using the Split System. Depending on the model that you purchase, and the star rating will determine how much you’ll save per year. However looking beyond the initial price to how you use it Split System can help as well.

Guide to Using A Split System

• Set the thermostat between 24C and 26C to cool. Any degree lower than that will raise the cost of running by around 10%.
• Use the economy setting if your split system has one. Ensure that you regularly service your air conditioner.
• Make sure that the sun’s heat is kept out by closing curtains as well as external blinds during the daytime. Close windows and doors to areas that are cooled when the split system is operating.
• When the split system has been switched off , and the cooler outside, open doors or windows and let cool air flow in.
• Insulate your residence to prevent the warm summer days out and cool in during winter.
• Dress appropriately for the weather conditions.

Why Select A Split System?

Wall mounted split air conditioning systems are the most widely used residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year since it keeps a constant temperature, saves costs (less consumption of energy) and produces relatively less noise when used. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall-mounted Split AC system are most budget option for a small room apartment or small house as they are comparatively inexpensive to purchase (depending on how many indoor units you require) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the room that it is placed in, which means that each room may have distinct temperature.

Air Quality

Many HVAC systems that are split feature air filtering and humidity control features that control the amount of dust and humidity within the space. This can provide those with sensitive conditions (children and elderly, asthmatic or allergic users) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to a single outdoor condenser that in turn provides you with satisfaction of having the ideal AC (in terms of physical and output constraints) to a specific space.

Split System FAQ

Are split systems similar to one would expect from an air conditioner?

Sure, Split System includes an air-conditioning unit. There are various kinds of air conditioning systems. It which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each system operates with refrigerant and electricity under the same principle but they are different in terms.

How long will it take to install a split system air conditioner?

In general for a single split system air conditioning installation can be completed in 3-6 hours. The exact length of time will depend on many factors such as below:

• Location and size of both outdoor and indoor unit
• Copper pipes that are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Do I need to replace or fix my cooling system?

In the majority of cases the air conditioner is more than 10 years and there are noticeable issues with your A/C there’s a good chance that it could be less expensive to replace it than to repair it.

To help you make the best decision, it is best to contact the experts at ComfyHome to provide you with an honest and accurate assessment of the condition of your air conditioner.

What size split system air conditioning do I need?

The standard measuring ratio will multiple the area of the room by a ratio of 0.15 in order to determine the power of the unit in Kilowatts.

For a room with a size of 40 square meters, you will need a Split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is suitable for 10 -20 sqm room areas.

The size of the Split system’s air conditioning can be affected by other variables such as the room insulation, amount of people residing there and’ locations.

To make an accurate determination of the necessary Split unit size, please call us for a more detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general, an air conditioner is constructed to last for 10-20 years, on average. However, it is contingent on a variety of things like the model of the AC, quality of the installation, regular service history, etc…

It is essential to service the Split System air conditioner often to extend its life and increase efficiency.

What is the best frequency to wash my air conditioner’s filter?

In accordance with Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every 2 weeks to increase the efficiency of your system and possibly reduce your energy consumption by 5%-15 percent.

Burwood Gas Heating Services

• Burwood
• Brivis Ducted Gas Heating Servicing & Repair Burwood
• Gas Appliance Servicing & Repair Burwood
• Gas Space Heater Repair Burwood
• Gas Hot Water System Installation & Repairs Burwood
• Braemar Ducted Gas Heating Servicing & Repair Burwood
• Gas Heating Burwood
• Ducted Gas Heating Servicing & Repair Burwood
• Gas Log Fire Service & Repairs Burwood
• Gas Heating Repairs Burwood
• Carbon Monoxide Testing Burwood
• Gas Heating Installation Burwood
• Vulcan Ducted Gas Heating Servicing & Repair Burwood
• Gas Heating Service Burwood
• Evaporative Cooling Repair Burwood

What Types of Systems We Service & Repair

Each type and brand of heating comes with its specific operation and maintenance needs Our experienced technicians are equipped with the expertise and experience to offer excellent services on all types of heating equipment for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in heating repairs and maintenance that specialize in all kinds and brands of heating equipment. We pride ourselves on having a rapid response time and dedication to efficiency, excellence and reliability.

We service and maintain the majority of important brands of heating units and systems, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reviews & Reputation
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Get a Quote With No obligation

Our Promise To You

At Melbourne Gas Heating we understand the frustration of not having hot water. It’s a situation we do not believe anyone should need to go through. This is why we put top priority on emergencies involving hot water. Our plumbers are friendly and trustworthy We are able to assist you in all situations.

We take pride in our customer service and it is our conviction that the small things count the most.

We take pride in our outstanding customer service. Here’s why our clients love us:

• We always show up when tell you we will.
• Our techs will give you a a call when they are 30 minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always taking care to clean up after our own mess.

We at Melbourne Gas Heating offer emergency and maintenance services for plumbing, electrical, and heating. If at any time you are unsure about our services, and the services we can offer, please contact us.